Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for July 9, 2006
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Ford
Help Request Answers
1989 Ford F-350 Custom 7.5L steering wheel VIN: 1FDKF38G06
hello i have a 4x4 350 with a dana 60 frt axle . the truck has a severe vibration @ 35 mph with or without load on it after hitting a series of bumps ( wash board ). i have inspected the frt end . i am not sure on the correct way on checking ball joints on thi...
1989 Ford F-250 Custom 7.3L Engine VIN: 1FTHX26M3K
H i This truck has a no start condition when warm and sometimes cold, always cranks and is mostly intermmitant. So we have not duplicated this problem but the customer has obsurved a few things The glow plug relay is clicking and the pump solenoid is also clic...
2004 Ford F-150 FX4 5.4L Transfer case VIN: 1FTPX14524
Customer complaint was that when the transmission is cold, it would make a loud bang once or twice at low speeds. He tried to shift it into 4 x 4 & the shift indicator would show that it was in 4 x 4 but the transfer case did not shift. We scanned the transfer...
1996 Mercury Sable LS 3.0L No Start VIN: 1MELM53S5T
Hello to the many techs who are smarter and more experienced than me. At 52 yrs of age I have fixed a lot of NO STARTS, but this vehicle has been a challenge and after over 20 hours of diagnosis and testing I find myself FATIGUED and not able to see the forest... Trouble codes: P1650 (PSP Switch out of Range), P1518 (IMRC stuck open)

Fixes & Summaries for Ford
Fix/Summary Answers
1966 Ford ac cobra 427CID Surge
thanks for the replies, i realize these are rare and not too many have experience on these. turns out the venturi size was too small( they are replaceable too).all the info i got said the idle circuit takes you up to 3000 rpm, so i was jetting the idle circuit...
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next