 Prev |
Professional Automotive Repair Technical Discussions for July 1, 2006 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 1999 Dodge Ram 2500 5.9L frnt axles seals VIN: 387KF26Z3X hello everyone, this 99 dodge ram r2500 p/u needs, 2 front axles seals.the one who recommended it dont want to do it and so the other techs.i was voted to do it,what do you think folks,i'm i lucky.i want somebody who been there than these kind of job how to do... |
View | |
| 2000 Dodge Durango 4.7L Hesitation VIN: 1B4H328N2Y Thanks ahead for checking this one out. We are getting an intermittent code reading that the tps readings and map reading are not in sync. Every time we check it out both sensors are reading fine and the truck is not acting up. Customer says it will jerk and s... Trouble codes: P0121 |
View | |
| 2001 Jeep Grand Cherokee Laredo 4.0L MIL Lamp on VIN: 1J46W4B521 I'm a former Ford tech now working on everything. This jeep has a cam sensor code in memory and works fine now. I have seen this on Taurus 3.0L 12V engines where the sensor drive overheats and causes problems in the sensor. Are these engines prone to this as w... Trouble codes: P0340 (Cam signal not received) |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 2000 Dodge Intrepid 2.7L engine VIN: 2B3HD46RXY Thanks for eneryones help,but cannot start this car without diconnecting the camsensor |
9 | |
| 2004 Dodge Ram 3500 ST 5.9L No Start VIN: 3D6WU38C84 Thanks for all the help, it turned out as suggested to be injector bleed off. I used a special tool to block individual injectors and it turned out to be two, no 3 & 6. I had to use a 3/16 ball to block one of the injectors as there was no change in pressure w... |
5 | |
| 1995 Jeep Cherokee SE 4.0L Hesitation, Stall well i had to let this beast go i didnt get any useful info on this lots of posts were the same old stuff check this replace this...im not a parts thrower hopeing somthing will stick i checked everything i could think of with no sucess i talked to owner and to... |
16 |
