|Prev||Professional Automotive Repair Technical Discussions for May 21, 2006
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Asian
|1991 Mazda 626 LX 2.2L clutch VIN: 1YVGD22B4M
vehicle came to me with a chatter problem in all gears. it had just been at a different shop where the clutch master cylinder and the slave cylinder were replaced. which did not fix the problem. i replaced the clutch assembly, machined the flywheel, and replac...
|1986 Toyota Corolla LE 1.6L Hesitation, Surge, Cuts out, Stall VIN: JT2AE83E0G
helo all hope someone can help. got this toyota corolla with a bad hesitation when acel. from a stop and a surge when cruising with lite throttle on flat surface. when problem acts up you give it propane and the symptom is grately improved. disconected the egr...
Fixes & Summaries for Asian
|1993 Infiniti G20 2.0L 3-4 shift VIN: JNKCP01D0P
every one that responded told me that i have the wrong trans installed.so i replaced it with the correct one and all is well now. it shifts as should.the problem is these trans are hardto find and there are about 5 different trans for this model.one must be sp...
|1998 Infiniti Q45 4.1L Cuts out, Misfire VIN: JNKBY31A7W
thanks to all that replied to my post. its been a week and havent heard back from the customer about any problems so i am calling it fixed. what we did was replaced all of the coils. found that the dealer recomends to do this when one coil has a problem. the n... Trouble codes: P0304.
|1993 Mazda 929 3.0L Front brake calipers VIN: JM1HD4617P
First I want to thank everyone for thier help. Every reply offered some light into the problem. I again drove the vehicle until the brake system got hot and the symptoms appeared. The vibration in the steering wheel, the loss of power due to the front brakes l...
|1997 Mitsubishi Eclipse GS 2.0L No Start VIN: 4A3AK44Y3V
Well the problem is solved, but the story has an unhappy ending. Andrew from Utah (my home state) hit the nail on the head. The cam and crank sensors have to be in sync. When I put #1 at TDC the cam was off by two teeth. Apparently this will cause a no spark c...