
![]() |
Professional Automotive Repair Technical Discussions for April 2, 2006 International Automotive Technicians' Network (iATN) - Members Only |
Next ![]() |
(Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. |
Open Help Requests for Chrysler
Help Request | Answers | |
1997 Dodge Intrepid 3.5L No Start VIN: 2C3HH46FOV Hi guys this car won`t start checked asd relay and there`s no computor ground from pcm to asd the power side checks out good ground wire from pcm to asd is good power and grounds check out good to the computor.also monator will not communicate with the pcm any... |
View | |
2000 Dodge Ram 1500 Laramie 5.9L govenor pressure VIN: 1B7HFL326Y Truck came in with a p1764 govenor pressure sensor volts low. When the code was cleared it would return as soon as you checked the codes again. The trans pan came off and there was no debris in the pan at all so we replaced the govenor pressure soleniod and se... |
View |
Fixes & Summaries for Chrysler
Fix/Summary | Answers | |
1999 Dodge Ram 1500 Van 5.9L cluster VIN: 2B6HB11ZOX Thanks to Louis, Brian, Kyle, Bill, Pete, Richard and Gene. I checked everything you guys talked about and found these answers... Nothing changed when PCM, air bag module, or ABS units were unplugged, Cluster produces bias voltage, and this cluster doesn't get... |
8 |