|Prev||Professional Automotive Repair Technical Discussions for March 4, 2006
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Asian
|1996 Acura TL 2.5L left high beam VIN: JH4UA2646T
This veh has Day Time Running lights. The left high beam headlight doesn't work or sometimes is very dim, when the light is working at a very dim almost not on at all, there is a silver relay inside veh at the right front that starts buzzing. when the relay no...
|2000 Isuzu NPR 3.9L Rear Main VIN: JALB4140Y7
Hello Isuzu techs I have an NPR with an oil leak from the rear main seal. The seal was replaced before coming to me. I am not sure how the new one is supposed to go on. It has a two piece seal. One piece is a metal ring and the other is a seal. When I got the...
|2000 Suzuki Esteem GL 1.8L No Start VIN: JS2GB41S3Y
This vehicle was towed in for a cranks, but will not start condition. When cranking the engine without stepping on the throttle, the engine will just crank normally. If you step on the throttle half way, the engine seems to want to start like it's flooded. St...
|1996 Toyota Tacoma DLX 3.4L Excessive Emissions, Surge, Poor Fuel Economy, MIL Lamp on VIN: 4TAPN62NOT
First after listening to this story we checked compression all cylinders were 155-175 psi.Next we scaned ecm and came up with about 15 codes some made no sense at all.Fuel pressure and volume were good. We cleared the codes and most reset immediately.We replac... Trouble codes: P0340
Fixes & Summaries for Asian
|2002 Nissan Sentra CA 1.8L Starting VIN: 3N1CB51D62
Hi everybody, thanks for all the help, almost all the replies suggested replacing the engine control modules, we replaced it and all is well. Thanks again.
|2002 Toyota Camry SE 2.4L MIL Lamp on VIN: JT2BG22K61
Thank you for the many replies, some within minutes of the posting. I installed a VSV and a modulator at the same time, cleared code and time will tell. Thanks again, Mike Trouble codes: P0401 (egr flow insufficient).