|Prev||Professional Automotive Repair Technical Discussions for January 21, 2006
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1999 Dodge Ram 2500 Truck 8.0L Transfer case VIN: 3B7KF23W8X
Great truck and has served owner for the past few years in its raised state with no odd sounds. This winter, when he engages the 4WD lever on the floor, all components do exactly as they should - light goes on in dash, actuator on front axle engages hubs, tran...
|1993 Plymouth Grand Voyager SE 3.3L No Start VIN: 1P4GH44R9P
Posting for a friend in another shop. He says that there are no codes present. He has the correct voltage to the PCM, coil pack and sensors. With the ASD energized, he has pos power to the injectors and coil pack but no ground from the PCM to them. The ASD pul...
Fixes & Summaries for Chrysler
|1999 Chrysler Sebring JXi 2.5L starter VIN: 3C3EL55H7X
Thanks for all that replied. Yes I checked for codes, Yes I tried locking and unlocking with key. That was working fine as red LED came on when locked. I did however miss the ASD relay. Dealer found power to or from ASD was missing. I was too quick to condemn ...
|1998 Dodge Durango 5.2L Engine VIN: 1B4HS28Y4W
Thanks to all responders. With the frt. differential, radiator, condensor, radiator upper cross support and frt. engine/differential insulators removed, the engine and trans came out as an assy., then were separated, and torque convertor removed from flexplate...
|2003 Dodge Grand Caravan Sport 3.3L back up lights VIN: 2D4GP44373
well it got down to either let the cust have van back not fixed or go with the gut feeling bcm. it was a defective bcm it affected not but the back up lights there no codes in the bcm pcm or trans module [...] and white wire con #2cav nine carries voltage to b...
|2001 Jeep Grand Cherokee Limited 4.7L Blend doors VIN: 1JGW58NC14
Well as most of you said the inner door was the problem. I am in the process of putting it back together and a few things I did learn. The hidden stud which I was warned about. Still was the last one to come loose since I have everthing else apart. Got to look...