|Prev||Professional Automotive Repair Technical Discussions for December 24, 2005
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Asian
|1990 Honda Civic 1.5L Will not shift VIN: 1HGED3LL02
I have this Civic LX that will not shift out of 1st gear. You can manually shift it into 2nd, if you try for 3rd after that it goes back into 1st. Fluid is not burnt and fairly clean. Throttle cable is hooked up and not binding or sticking. When it is put into...
|2001 Isuzu Trooper Limited 3.5L Unknown VIN: JACDJ58X81
Truck came in with no forward movement. Noisy pump and plugged filter. Removed and inspected pan and filter. Found metal in pan. Fluid burned bad!!!. removed and rebuilt complete. Found that 1-2 band and drum were worst worn/burnt. Suspected converter failure ...
|1998 Lexus ES300 3.0L Rear Valve Cover leaking Oil VIN: JT8BF28G5W
For couple of Months,I have a Pretty good Oil leak at the ? rear valve cover. and been too buzy to do it! It looks like it may have a rear main seal leaking also or its following the valve cover or head and making it ways over maybe. Been Using Mobil 1 since 8...
Fixes & Summaries for Asian
|1993 Mazda MPV Passenger 3.0L brake lights & park lights VIN: JM3LV522OP
Thanks all for the advice.I'll try to make this response 'short'. A little humour, now that its fixed. After wasting some time chasing a relationship that made sense on paper.Common sense once again prevailed.I located several (18)corroded wires in the left re...
|1987 Subaru GL-10 Turbo 1.8L No Start VIN: JF2AN55B1H
thanks for all you help on this fix. we did have the valve timing off. i kept relaying to my tech to put the crank at tdc to install the belts, but that was not the proper procedure. the car runs fine now propeley timed. thanks everyone for your help. dac