Prev | Professional Automotive Repair Technical Discussions for November 25, 2005 International Automotive Technicians' Network (iATN) - Members Only |
Next |
(Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. |
Open Help Requests for Asian
Help Request | Answers | |
1995 Nissan 300ZX Turbo 3.0L hvac VIN: JN1CZ24D7S Customer's complaint: Vehicle not getting warm under normal conditions for heating. The vehicle's coolant system was pressurized. A radiator hose was found with a hole in it. The hose was replaced. The coolant system was checked again. This time, the coolant w... |
View | |
2005 Nissan Altima SE-R 3.5L heater VIN: 1N4BL11D75 To all Nissan techs My friends Altima which has never had any cooling system work since new, all of the sudden the heater is cold at idle. when you give it a liitle gas you can hear a gurgling sound coming from the heater core area inside the car and then the ... |
View |
Fixes & Summaries for Asian
Fix/Summary | Answers | |
1994 Infiniti Q45 A 4.5L No Start, less thn 60 psi comp VIN: JNKNG01D2R After removing all eight plugs and reinstalling them without oiling the cylinders, I cranked the engine several times, resorting to desperate measures, I sprayed carb, cleaner (B12) in the intake manifold while cranking, no start condition persisted. one more ... Trouble codes: 55 (everything OK). |
6 | |
1995 Mazda Millenia 2.5L MIL Lamp on, lack of power VIN: JM1TA2215S thanks, to all fellow techs that replied, as I stated in my letter, this car had some cylinder head work done in another shop. One of the replies I received was to check the timing components, which was mentioned to the customer who then decided to take the ca... Trouble codes: P0154, P0325. |
8 | |
1992 Toyota 4Runner SR5 3.0L lack of power VIN: JT3VN29V3N Thanks to all of you who offered help. Robert [...] got it right, the idle switch of the TPS was not adjusted right. The truck was not seeing idle and as a result the timing was 15 degrees slow. The customer had fiddled with the idle stop screw (and everything ... |
13 |