|Prev||Professional Automotive Repair Technical Discussions for November 13, 2005
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1998 Dodge Dakota 5.2L abs VIN: 1B7GG22YOW
vehicle came in with abs amber and red brake light iluminate as soon as you turn the key. hooked up scanner could not comunicate with abs so we tested speed sensor and it glitched so we replaced it. now the lights dont come on until after you drive about 1/2 ...
|1997 Jeep Grand Cherokee Laredo 4.0L ABS motor VIN: 1J4GZ58S8V
The ABS light comes on intermitantly. Sometimes for a day, the last time it was on for just over a month. Checked codes and says motor not working. I tested the motor with alternate power source and it does run, sounds a little odd, but does work. The light is...
Fixes & Summaries for Chrysler
|1998 Chrysler Cirrus LXi 2.5L No Start VIN: 1C3EJ5WN31
You guys were right,it was a ground problem. I found a ground wire that had gotten pushed back up into the wire loom that grounded to the head. Thank you Lorne for taking time to fax me the pin outs. Thanks again for everyones help...Shawn
|1996 Dodge Grand Caravan ES 3.8L No Start, Stall VIN: 1B4GP54L8T
Thank you to all who responded. I inspected the engine harness in multiple locations as many of you suggested. No opens or shorts were found. During testing I originall was back probing as to not disturb connections. I reluctantly disconnected many connectors ...