|Prev||Professional Automotive Repair Technical Discussions for October 28, 2005
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1996 Chrysler Cirrus LX 2.5L Surge, MIL Lamp on VIN: 1C3EJ56H0T
We keep getting a recurring P*** code in this car, with very infrequent driveability symptoms. Initially, it came in with a rough idle and surging, we felt it while pulling into the shop, then it quit and has been fine for almost 2 weeks. It had a P*** in memo... Trouble codes: P****
|1998 Dodge Ram 1500 Truck 3.9L CAB Module VIN: 1B7HC16XOW
Hello pulling my hair out here. We have this dodge pu with rwal and no speedo with the anti lock light on. NO check eng light or codes stored in the pcm. Cant test the rwal because I dont have a DBRIII. We replaced both trans output and rear speed sensor ( onl...
|1999 Dodge Intrepid 2.7L No Start VIN: 2B3HD46R1X
99 DODGE INTREPID 2.7 REPLACED WITH ENGINE OUT OF A 2003 INTREPID. ENGINE WOULD NOT START. SCANNER SHOWED CAM CRANK OUT OF SYNC. CHANGED CAM TRIGGER/SPROCKET & FLEX PLATE/CRANK TRIGGER WITH 99 PART #S. ENGINE STARTS WITH CAM SENSOR UNPLUGGED AT APROX 1000 RPM ...
|1993 Jeep Cherokee Country 4.0L rear brakes VIN: 1J4FJ78S96
hello everyone, this one has me in knotts. I have a 93 jeep cherokee the customer brought in with a concern of pedal spongy, and brakes will not lock up. fellow technician has been working on vehicle. This vehicle has been in before for same concern. so far th...
Fixes & Summaries for Chrysler
|1998 Chrysler Sebring JXi 2.5L Seat Belts VIN: 3C3EL55H7W
Thanks to all that replied, this car did not have pretensioners as some of them do in later years, this car did have a Seat Belt Module located inside the center console at the back of the handbrake lever. Once we got the right diagram we found the ground circ...
|1999 Dodge Ram 1500 Truck 5.9L Poor Idle Quality, Misfire VIN: 1BZHF16ZXX
customer needed vehicle for work has not brought back for repairs appriciat your help intake manifold seam logical but could not confirm problem
|1999 Dodge Ram 2500 Van 5.9L Poor Idle Quality, Hesitation VIN: 3B7KF23Z6X
Thank you all for your help. I found the intake gasket was alright, I suspect the injectors need to be cleaned. Have to save that repair for when customer has more money. Thanks again.
|1994 Jeep Grand Cherokee Laredo 5.2L hard start cold VIN: 1J4GZ58Y7R
Sorry for delay, customer just returned car for repairs. As test indicated, everything pointed to a faulty pump module. Removed gas tank and found that a new module had not been installed, just a new pump. replaced with a new module assembly and problem fixed....