|Prev||Professional Automotive Repair Technical Discussions for October 16, 2005
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1995 Chrysler Cirrus LX 2.5L Cuts out, Stall, MIL Lamp on VIN: 1C3EJ56H7S
This 1995 cirrus dies periodically at stop signs. the car will restart but then dies again. four to five restarts later the car runs and drives fine. Also on the highway at approx. 65mph the car will fall on its face for a second then acts fine but when this h... Trouble codes: 13 (no map change)
|1996 Dodge Grand Caravan ES 3.8L No Start, Stall VIN: 1B4GP54L8T
This one has multipe failures I am sure are all related. The MIL does not come on even for bulb check. Engine cranks and fires for one sec and dies. No communication with scanner. Instrument cluster is inop all guages read zero at all times. Alarm light is not...
|1998 Dodge Durango SLT 5.2L keyless entry remote VIN: 1B4HS28Z1W
How do you program the keyless entry remote fob? What is the procedure? Can it be done without a scanner? Or if you need a scanner, will the snap-on modis do this?
Fixes & Summaries for Chrysler
|2000 Chrysler Sebring JXi 2.5L No Start VIN: 3C3EL55H4Y
Thanks for all the quick replies .This car is back on the road thanks to another junkyard distributor .I guess i should have known,but what kept me unsure was the fact i couldnt get it to fire the coil when actuated with my genysis.I decided everything else ch...
|1999 Dodge Ram 2500 Truck 5.9L 1-2 shift VIN: 3B7KF2369X
Hello all IATN members, First of all I want to thank all of you who took time to read and respond to my help request. We ended up putting a re-man transmission in the truck and that seems to have taken care of the problem, really does not make a lot of sense, ...
|1993 Plymouth Voyager 3.0L compressor VIN: 2P4GH2536P
Thanks to all who offered help with this problem.After flushing the system, replacing the dryer,expansion valve(which was an OEM part), and the evaporator the problem still existed. I adjusted the round cap that is threaded into the end of the expansion valve ...