|Prev||Professional Automotive Repair Technical Discussions for September 18, 2005
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|1991 Ford Explorer XL 4.0L Cuts out VIN: 1FMDU34X2M
Hello IATN members, I have aquired this fine unit and am in no hurry to fix it but I need help. The engine starts and runs perfect from an idle up to around 1800 rpm. Once this hits around 2000 rpm the engine cuts out just like a rev limiter in kicking in. I...
Fixes & Summaries for Ford
|1992 Ford Aerostar 3.0L abs VIN: YE345KE321
thank all tech gave me a chance to fix this problem.replaced a bad ABSV and the connector. took care the problem . learning exp. from all you .thank again.
|1995 Ford E-350 Econoline XL 5.8L charge gage VIN: 1FBJS31H1S
A thank you to all who replied to this vehical. There was a bad ground between the body and the battery. The alt. gage is back to normal, 14.2 volts with everything on. During this time, the starter quit working. I put on a new rebuilt starter,only one on hand...
|1999 Ford F-250 Super Duty Lariat 7.3L Unknown VIN: 1FTNW21F8X
Most have said to replace wheel bearing. I will recheck the bearings and see the needle bearing is part of the bearing we replaced. After that I remove and clean the locking hub. If I can ever get the truck back in to do this. Thanks for all the help. I will t...
|1996 Mercury Grand Marquis LS 4.6L Misfire VIN: 2MELM75W8T
Forgot to say had new spark plugs . Decided to swap wires and road test - no change from misfire in #1 . Switched the #1 & #3 plugs & road test , misfire is now on #3 cyl.Scope pattern had looked Good when misfiring !?!?!Just a bad new bosch platinum plug ! Trouble codes: P0301 (1 Cyl Misfire code).