|Prev||Professional Automotive Repair Technical Discussions for August 6, 2005
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for European
|1997 Mercedes-Benz S500 5.0L Transmission VIN: WDBGA51GOV
We disassebled transmission and discovered cluthes were burnt and EPC would not test. Overhauled trans and replaced valvebody with new solinoids. Car has same problem, code p0748. erased code but it came back. Anyone have a problem like this before. Will a cen...
Fixes & Summaries for European
|1988 BMW 325is 2.5L No Start, Poor Idle Quality, Cuts out, Stall VIN: WBAAA13085
Thanks to everyone who responded. I had tried everything that everyone had suggested prior to posting. What I found was, I was loosing the battery voltage as the car ran. I then went backward from the coil to the DME control unit to the ignition switch. Ther...
|1996 Saab 900 SE Turbo 2.0L no start VIN: YS3DF78N1T
First of all thanx to all who took the time to help. We had 2 separate problems on hand. Problem #1 - Int. no start. Problem #2. Int. Stalling. Problem 1. The intermitten no start was a broken wire at crank sensor neck. will make contact int. and car would fir...
|1996 Volkswagen Golf GL 2.0L Oil light Flashing VIN: 3VWFA81H1T
let me say, iatn rocks. Thanks for such a speed response. Darrel's suggession closely fit my situation. Let me attach his response. 'First off dose the light and buzzer come on over 2000 rpm ? If so and your presures are good, ground the wire going to the swit...
|2001 Volkswagen EuroVan MV 2.8L door locks VIN: WV3AB47071
Sorry for the delay this van was taken to the dealer because the scanner i had wont work and the replys all said that the doors would have to be taken apart so that it could be dia. the right way. So my feeling are that this information that I have tpyed would...