Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for July 8, 2005
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
1994 Chrysler LHS 3.5L Poor Idle Quality, Hesitation, Stall VIN: 2C3HD56F3R
First, let me say thanks to all who read this. I'm stupified, or maybe I'm just burnt. I have a 94 lhs in the shop and it came in running rough from another shop. Customer said it just started happening a couple of weeks ago and took it to her mechanic. She ha...
2000 Dodge Durango 4.7L Starting VIN: 1B4HS28N6Y
Came in on a wrecker and would not start. acts like asd relay is bad but its not...wont communicate with scan tool(tried 4 of them) and has no fuel pressure and no injector pulse. the guages dont work. odometer flashes. leaning towards pcm but dont want to tak...
2001 Dodge Ram 2500 Truck 5.9L cluster VIN: 1B7KF23621
truck came in with no buss message and no cluster.checked codes ,had a p1698.cleared code problem didn't came back. we check all connections and no problem found that we could see.all diagnostics we found didn't say anything about ctm module.maybe that was a q...
2002 Dodge Grand Caravan Sport 3.3L air bag VIN: 2B4GP44R02
This caravan has the air bag light on, is not flashing and is on constant when key is turned on. Not much info on alldata and i do not have a drb. Is a drb the only way to diag. this? i know its not much info. but I cant find a whole lot either. Thanks.
1992 Jeep Cherokee Laredo 4.0L Excessive Emissions VIN: 1J4FJ58S7N
hi guys i really do not have a problem with a car. i have a problem with a sun gas analyzer. i think it is a old bar 90 smog machine.the screen will go thru system check then come up with a "rom (18h) not supported".we are thinking it is aprogramming problem b...

Fixes & Summaries for Chrysler
Fix/Summary Answers
1992 Dodge Dakota 3.9L Excessive Emissions VIN: 1B7FL23X1N
I recieved 9 replies to my Help request, I had neglected to add in my original request that the EGR and transducer were replaced, sorry about that. I covered everything that was a possibility. The chain was perfect, has a tensioner type. I checked and rechecke...
1995 Dodge Neon 2.0L Misfire VIN: 1B3ES47C35
i did switch plugs and injetors with 1&4 did not did have an intake leak that i found in the first place,i replaced the seals before i did anything else.i think it might be the computor but cant prove it.the cost. wanted the car back.could not do any...
1996 Dodge Ram 2500 Truck 5.9L No Start VIN: 1B7KF26ZXT
A doner PCM got this truck running, although poorly as it blew catalyst chunks out of the previously removed O2 sensor hole in the Y pipe. The fix was a PCM and a Cat and 2 new 02 sensors of course. The owner says the CEL has ' been on & off for years ' Now he...
1997 Dodge Ram 1500 Truck 5.2L airflow VIN: 3B7HF13Y2V
Well, all twelve replies pretty well agreed that it had to be the second check valve or cruise control vacuum line. Indeed the new vacuum check valve fixed the problem and the customer is happy. Thanks to all who replied,
1999 Dodge Intrepid ES 3.2L bcm VIN: 2B3HD56J6X
I want to Thank All who responded to my request,Unfortunely my computer crashed and I lost 5 of the 9 replies,so to Chad [...],,and all the rest Thank you for your help.One of the replies asked if we could turn the compressor ...
1996 Jeep Grand Cherokee Limited 5.2L Hesitation, Surge, Cuts out, Stall, Misfire VIN: 1J4GZ78Y7T
The prob. on jeep was bad ign coil. Two people said I should ck coil which I had done but the coil would ck ok and then break down under load. Thanks for help. Jim Trouble codes: 370 (No crank ref.).
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next