Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for June 30, 2005
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
2000 Chrysler 300M 3.5L Evaporator VIN: 2C3HE66G3Y
I'm really stuck on this one. Vehicle arrived in the shop on a mild day with A/C inop. Checked pressure and found system low. Using a Bacharach / Yokogawa H10pm leak detector I located leaks at evaporator and compressor body. Performance was good (35 degree te...
1996 Dodge Grand Caravan ES 3.8L security VIN: 1B4GP54LXT
van will randomly start and stall within 3 secs. it happened once and i went to the customers house with my scan tool and the BCM would not resopond. we noticed the alarm set light was flashing. then the next morning it started normally and with the scanner we...
1996 Dodge Ram 2500 Truck 5.9L rear brakes VIN: 3B7KF223C3
rear brakes locking
1996 Dodge Grand Caravan SE 3.3L No Start VIN: 1B4GP44R6T
Hello Guys an Girls I have this storm in my shoulder eating me up. It came to me after it stopped running while driving owner claims. He replaced the crank sensor coz it had stopped on him before this. When I checked it out I had no cam signal. I replace it an...
1997 Dodge Avenger ES 2.5L Hesitation, Surge, Cuts out, MIL Lamp on VIN: 4B3AU52N5V
Hesitation on acceleration, rough idle, reaccuring code PO300, multiple cylider misfire. Car has new cap, rotor, plugs, wires, EGR valve (OEM). Trouble codes: P0300
2000 Dodge Durango 5.9L oil pan
Help me please dodge guys. My uncle from texas(i am in iowa) came up for the 4th of july weekend. On the way up, he was running later than normal, so he called last night. When he called, he mentioned to us that he needed his durango worked on. When i jacked t...
2001 Dodge Grand Caravan ES 3.3L Steering VIN: 2B8GP44G61
Got a weird one here. This van makes a shudder/vibration and a little noise when you turn the wheel quickly at idle. As soon as you rev up the motor to about 1,100 rpm the problem goes away! I think if I would put a smaller size pulley on the power steerin...

Fixes & Summaries for Chrysler
Fix/Summary Answers
1992 Chrysler New Yorker Fifth Avenue 3.8L Stall, MIL Lamp on VIN: 1C3XV66L5N
Well, finally got it figured out. Guys thanks for all the help with this thing. What finally happened is that it died and for once refused to restart. Every other time this thing would immediatly come back to life. While checking for the no start condition, we... Trouble codes: 21 (o2 sensor shorted or open), 35 (egr solenoid circuit shorted or open).
1996 Dodge Caravan LE 3.3L mil / abs/ air bag all on & turn signals / blower VIN: 2P4GP45R4T
Hello, fixed and solved. After some assistance from Mark B from Mark's Auto Service in Oakville, we made heads and tales of the wire diagrams some from Alldata and some from Mitchell. The we traced wire right from ign switch, through junction block to PDC, and...
1997 Dodge Ram 2500 Truck 5.9L Hyper Power Steering VIN: 1B7KF26D2V
Consensus is that it's a bad steering box or blocked fluid return. Thanks for responding, I'll keep you posted when it gets done.
2000 Dodge Ram 2500 Truck 5.9L No Start VIN: 1B7KF2360Y
Well we finally have this one repaired.We didn't get a lot of replies(thanks to those that did) so we proceeded very cautiously.What we found was a loss of power(voltage)to the transfer pump.We checked all powers and grounds to the e.c.m. and loaded each circu... Trouble codes: P1688, P0230.
2000 Dodge Dakota 4.7L No Start, NO BUS VIN: 1B7GL22N1Y
thanks to all of you for giving me fresh turns out i had a defective cam sensor.i had some extra work to do because this vehicle came from another there is a tsb for this year of engine,the cam sensor can come in contact with the gear. thanks...
1993 Plymouth Voyager SE 3.3L No Start, Misfire VIN: 1P4GH54RXL
hello all, thanks for all the replies. dave from oregon hit right. the crank sensor was out of adjustment. although we had adjusted it and replaced it twice we just never got it adjusted correctly. after pulling the sensor out to inspect the flywheel i reinsta...
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next