|Prev||Professional Automotive Repair Technical Discussions for June 25, 2005
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for European
|2000 BMW 528i 2.8L center vents VIN: WBADP6347Y
The center vents of this BMW wagon close at approximately 45mph. They reopen when vehicle speed goes below 30 mph. Fan is definantly running during this time, so I think the final stage unit is ok. This happens only after car has been driven about an hour. At ...
|1994 Jaguar XJ6 4.0L Starter,Shift Lock
Door locks inop,key fob only turns headlights on,does'nt lock doors,Jaag. said dissconnect batt. for 1 hr.hook batt up and press key fob 5 times.Didn't work
|1997 Volkswagen Jetta GL 2.0L cmp sensor VIN: 3VWXA81H5V
after perfoming timing belt replacement. check engine light came on, however car is running fine so feel that alignment/timing must be ok. scanned with modis & determinator scanners & received code: p0341/vag code 16725. code=g 40 cmp sensor not a plausible si...
|1999 Volkswagen Passat GLS 2.8L Unknown VIN: WVWAD63BOX
hello. put o2 sensor in the vw. bank 2 sensor 2. cut the wrong o2 wire repaired. the wire and then installed the correct o2. car ran fine scanner reconized all o2 sensors seem to be going into closed loop quickly and flipping well. car runs poorly and is givin...
|2000 Volkswagen Jetta TDI 1.9L lacks power VIN: 3VWRF29M0Y
The cleaning of the intake and exhaust cooler have generally done the trick on these. With the torbo showing full function we are a little stumped. No codes. Thanks in advance for any tips. It was very loaded with carbon before the clean. Keith & Rick
Fixes & Summaries for European
|1996 Volkswagen Cabrio 2.0L Surge, MIL Lamp on, LACK OF POWER VIN: WVWBB81E2T
COPY OF UPDATE: either i'm stupid, or just don't do enough vw's, i had a different vw, one year older, same engine in today for a maintence timing belt, when i set up the marks for belt removal it was different from what i had used on the problem vehicle, rech... Trouble codes: P0341 (cmp out of range).