|Prev||Professional Automotive Repair Technical Discussions for May 15, 2005
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2001 Dodge Grand Caravan ES 3.8L MIL Lamp on VIN: 2B8GP54L01
This vehicle has a code P1193 present according to Alldata the setting criteria is when the signal exceeds 4.9 volts. The voltage on the iat signal line at start up is often exceeding the 4.9 volt threshold. I have looked for relative service bulletins and fou... Trouble codes: P1193 (IAT sensor fault)
|2002 Dodge Ram 1500 Truck 5.9L Poor Idle Quality, Surge, Cuts out VIN: 1D7HU18Z12
Customer brought truck to us after spending $300 on an inconclusive diagnosis from one local Dodge dealer - no repairs performed. He complained of a stumbling or surge at very light acceleration from about a 35-40 mph cruise - and at very light cruise on highw...
|2005 Dodge Dakota SLT 4.7L MIL Lamp on VIN: 1D7HW48N95
hello everyone, this is my first time requesting help and i wouldn't bother you, but this truck is driving me insane. it has a code po456 for a small evap leak. there are no tsb's or pcm updates for this concern and the star center tells me there are no occur... Trouble codes: P0456
Fixes & Summaries for Chrysler
|2001 Chrysler Voyager 2.4L speedometer VIN: 1C4GJ25B21
hello tech, first, many thanks to all who shared their knowledge.I recieved three ways to fix this problem.#1 by using scanner,go to body computer and do instrument cluster calibration.#2 hold the trip button and then turn the key on.it suppose to reset the cl...
|1993 Dodge Caravan SE 3.0L Suspension VIN: 2B4GH4533P
Thanks to the many members who took the time to try to help. Most responses pointed to broken sway bar hidden by frame bushings, bad control arm bushings, loose rack mounting bolts, and ball joints. Having gone over everything I could think of, I got the vehic...
|1997 Dodge Intrepid 3.5L MIL Lamp on VIN: 2B3HD46F8V
I received lots of good inforamtion on this one. The customer did not want to go any further with diagnostics since it was running fine. I did check fuses as suggested by one member and they were OK. I cound not find any anomalies with any of the sensors or ot...
|1997 Dodge Ram 1500 Truck 5.9L Cuts out, MIL Lamp on, a/c on only VIN: 1B7HF13Z7Y
Hi tech's thanks for all the tips, but it turned out to be red with [...] tracer from the speed control switch to the Jtec pin 4, was shorted to power from AC control circuit. I was at a class John [...] was the instructor he told me where to look I guess tp...
|2001 Dodge Ram 3500 Truck 5.9L MIL Lamp on VIN: 1B7MF33771
Hi again.Sorry for the long time it took to post the fix,but Iwanted to be sure.I finally changed the APPS sensor and now every thing is O.K. Before Ichange this one,what I saw with a scope taped on the signal wire(it is like a TPS 0 to 5 volt) KOEO every thin... Trouble codes: 122 (app sens volt too low), 234 (turbo boost limit exceed), 121 (app sens do not agree with idle valid signal), 1693 (dtc detected in pcm), 123 (app sens sig volt too hi), 606 (ecm failure).