|Prev||Professional Automotive Repair Technical Discussions for April 17, 2005
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1993 Dodge Dynasty LS 3.3L Misfire VIN: 1B3XC56R2P
car idles good under a load it misfires mostley when warmed up replaced plugs wires coil pac and pcm fuel psi 40 to 50 when its misfirering ck converter ok injector balance test ok no codes it seems that the ingnition is breaking up
|1995 Dodge Intrepid ES 3.3L Stall, Misfire, Poor Fuel Economy VIN: 2B3HD56T4S
Hello all, I am on vacation, working around the house, not planning to look under any hood...well the neighbor girls dodge pulls in the driveway and the smoke from the exhaust was impressive...I didn't bring many tools home but had some "leftover parts" so I t...
Fixes & Summaries for Chrysler
|1999 Chrysler Town & Country (Van) LX 3.8L oil feed rightrocker arm VIN: 1C4GP54L9X
we opted to replace the engine thank you all for your very valuable insight
|1987 Dodge Aries LE 2.2L vibration VIN: 1B3BD36D6H
Thanks to all of you that replied to my help request, we finally got the car back to try new, oem engine mounts. Many of you suggested oem mounts and you were right on. The oem mounts don't look or feel any different than the aftermarket mounts, but there is a...
|1997 Plymouth Grand Voyager SE 3.3L Stall VIN: 2P4GP44R5V
Of the 10 replies I received, most said to check the crank position sensor. A couple said to check torque converter lockup. One said to check grounds. My sister-in-law didn't want to persue it unless it begins to fail more frequently. So I'll have to close thi...