Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for March 6, 2005
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
1994 Chrysler Intrepid 3.3L Cuts out VIN: 2C3HH46T7R
HELP !!! I am a suspension shop and know almost nothing about the ignition and fuel systems. [I date back to points and carbs] [old fart] Car acted as if key was turned off and on in 1 second. One interesting thing,,,"cruise" light flashed on and off again. Ta...
1990 Dodge B250 5.2L Overdrive VIN: 2B6HB21YXL
Hi Chrysler Guys, Here is the issue. This 518 transmission does not go into overdrive. Here is the list of checks) Trans was sent to transmission shop for no overdrive, diagnosed as internal, rebuilt and problem persist. Computer was installed by someone else,...
1996 Dodge Ram 1500 Truck 5.2L No Start VIN: 3B7HC13Y2T
hi guys have a no start with inj pw staying at 0 while cranking. check for spark; ok, fuel pressure; ok, cranking rpm; ok, and scan data. install noid light on all inj and have flashing light. i replace both o2 still no change. what can cause this problem. hav...
2000 Dodge Ram 1500 Truck 5.2L low oil pressure VIN: 1B7HC16Y9Y
checked oil pressure. was 60 lbs at idle hot, but when you raise rpm drops to almost o and lifters clatter. changed oil and filter and re checked,still same. removed oil pan and found some sludge. screen had some junk in it, and oil pan did not have that much ...

Fixes & Summaries for Chrysler
Fix/Summary Answers
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next