|Prev||Professional Automotive Repair Technical Discussions for February 12, 2005
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1995 Chrysler Cirrus LX 2.5L heads VIN: 1C3EJ56H7S
Hello All, i've got a moderate problem with this one. one of my mechanincs spun the cams by hand at the wrong time and bent valves on #1 and #4 cylinders. questions to you are: are the heads easier done in the car? do you think piston damage has occured? any p...
|1984 Dodge 600 2.6L Excessive Emissions, Poor Idle Quality, Surge, Stall VIN: 1B3BV51G9E
This engine is running lean at idle and off idle. Gas has to start coming out the center venturie, for it to run. When choked the rpms go up. Vac at is only 13" and only goes to 15" with the carb choked. Shouldn't I get a better vac with the choked closed when...
Fixes & Summaries for Chrysler
|1988 Dodge B250 5.2L Hesitation, Surge, Cuts out, Stall VIN: 2B7HB23Y6J
the fix for this van was new fuel injector in the throttle body one was spraying well the other would skip stop then flood replaced with new on all better tanks
|2001 Dodge Ram 2500 Truck 5.9L low power VIN: 3B7KF23671
THANKS GANG, Ya'll are great!! as stated lift pump was bad , replaced & the truck ran better & the low power occured much less often, but still did it once in awhile. Replaced map sensor and all is well. I think it would see high turbo pressure & retard inject... Trouble codes: P1693 (dtc stored in pcm), P0216 (fuel injection pump failure), P0522 (oil pressure sensor low), P0523 (oil pressure sensor high).