|Prev||Professional Automotive Repair Technical Discussions for January 16, 2005
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|1989 Ford Tempo GL 2.3L All VIN: 1FAPP36X5K
The customer came in with leaking brake lines. I replaced all brake lines, both rear cylinders, both front calipers. All brake lines are new. I replaced the master cylindar twice (They were bench bled). Replaced the control valves that screw into the master cy...
|1996 Ford Windstar GL 3.8L intake manifold gaskets VIN: 2FMDA514XT
I am familiar with the problems that the 3.8L Windstars have with coolant loss. So I am confident that the problem with this engine is with bad intake manifold gaskets. I have searched the Felpro web site, only to find out that there are two different gasket l...
|2002 Ford Econoline E350 Super Duty 7.3L hard start VIN: 1FT5S34F6Y
Hello Fellow Tech's, I have a problem a with hard start on a 7.3 litre turbo diesel, hot or cold. If vehicle sits for approx. 10-15 minutes I have an extended crank before vehicle fires. I checked for codes and had several codes appear. I cleared the codes and... Trouble codes: P0562, P1212, P0541, P1670
Fixes & Summaries for Ford
|1995 Ford B700 5.9L Engine oil VIN: 1FDXB80C0S
We put pressure on the cooling system and removed the rocker cover again and there was a drop of coolant by the valve spring on #4 cylinder. We removed the head and took to an engine machine shop. He magnafluxed the head with the #4 valves out and it showed no...
|1997 Ford F-350 7.3L l rear brake VIN: 1FDJW35F4V
Thanks for all the help. It was 2 things ,frist the arm was not real free, the other thing was the spring on the cable seemed ok cable was free, but changed anyway. The spring on the new cable was about an inch and half longer then the old one .this was more t...