|Prev||Professional Automotive Repair Technical Discussions for January 8, 2005
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|1988 Ford Ranger STX 2.3L Cuts out VIN: 1FTCR14A6J
Hi Guys, This is my first time posting. I usually solve my problems referencing the Fix Database, outstanding resourse. This problem/repair is my own 1988 Ford Ranger. Yeah, it's fixed but it's a weird fix. I thought this might be a great help to someone out ... Trouble codes: 31 (Low EGR Flow)
|1990 Ford F-250 Custom 5.8L Poor Idle Quality, Misfire, MIL Lamp on VIN: 1FTHF25HOL
has anybody dealt with this before. i work in a chevrolet-gmc dealership and this vehicle was traded in and i dont have the information or equipment to properly diagnose this vehicle. Trouble codes: 12 (rpm unable to reach upper test limit), 31 (pfeevp or egr circuit below mininum voltage)
|1992 Ford Ranger STX 2.3L No Start VIN: 1FTCR10A0N
This truck came into shop because of bad fuel pump. Replaced fuel pump and now have fuel pressure. Now comes the fun part, we have no injecter pulse. Checked fuses, injector harness & EEC relay. I have power at the injectors and when the ignition is turned on ... Trouble codes: 114 (ECT range), 116 (ACT range)
|1996 Ford Windstar GL 3.8L Hesitation, MIL Lamp on VIN: 2FMDA5140T
Sorry but in a haste to post help i didnt fully disclose all information i had so i m posting same vehicle with additioncal information. Without proper information i had a couple of post that provided me with information which i had, but thanks to everyone tha... Trouble codes: P0340
|1996 Ford Explorer XLT 5.0L Hesitation VIN: 1FMDU35P6V
obvious hesitation from a stop. I can even simulate in shop in park by quickly snapping throttle, at times it sounds as though it is popping back up through the air snorkel (lean misfire?). No KOEO codes, no KOER codes. It did have a p0153 code (up O2 slow res...
|2001 Ford Escort SE 2.0L Engine Service Light VIN: 3FAFP13P61
Hello All I had this 2001 Ford Escort Automatic that came with a engine light on, After i scan with the Modis, i got code PO761 Stuck shift Solenoid and code PO733 Incorrect Gear Ratio, the costumer was in a hurry, so i clear the code, road test the car all s...
Fixes & Summaries for Ford
|1996 Ford Windstar GL 3.8L Hesitation VIN: 2FMDA5140T
I havent had the chance to do the repair on this vehicle but what i learned is that this vehicle have a a high probability of failure with the cam sensor. Cam sensor tend to break sometimes . It will break into the syncronizer and damage the syncronizer and yo... Trouble codes: P0340.
|1999 Ford F-250 Super Duty Lariat 5.4L front end VIN: 1FTPF27L9X
ok guys here we go. man i got so many replies i had to hurry up and fis this one. thank all for the help. i tried to thank everyone but the replies just keep comeing in. so thank everyone who helped. no the fix to this problem was easy. but the problem was som...
|2002 Ford Crown Victoria 4.6L window wipers VIN: 2FAFP71W93
Thanks for everyones replys. Most stated the wiper motor is at fault. I will be replacing it next time they bring car to us. Had one reply from Leonard from Arkansas stating be very carefull when retightening the 7 phillips head screws that secure the wiper ...
|2004 Ford F-250 Super Duty Harley-Davidson Edition 6.0L MIL Lamp on VIN: 1FTNW21P64
Hello all. Thank you very much for the replies and valuable advise. I have not yet fixed the problem mostly due to the holidays and work taking all my spare time. The vehicle runs OK except for an occational 'hiccup' now and then so I have left it on the backb... Trouble codes: 299 (un documented).
|2000 Lincoln Town Car 4.6L brake lamps/shift interlock VIN: 1LNFM81W5W
Sorry I did not close sooner I was waiting to see if the problem was fixed. Since only the connector was melting I felt that either the connector or the switch was heating up and causing the problem. Originally another technician replaced the switch with one f...