× Auto Repair Pros Member Benefits TechHelp Knowledge Base Forums Resources My iATN Marketplace Chat Pricing About Us Join Industry Sponsors Video Members Only Repair Shops Auto Pro Careers Auto Pro Reviews
Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for January 2, 2005
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
1999 Chrysler Intrepid 3.2L Fan Control Resistor VIN: 2C3HH46ROX
Hi everyone, this vehicle came in with only high fan speed on Feb 2. Checked for power at the resistor and everything looked ok. Changed resistor and all fans speeds worked properly. Vehicle came back on Feb 16 with same problem. Checked everything again and r...
View
1995 Dodge Ram 2500 5.9L No Start, Hesitation, Cuts out, Stall, Misfire VIN: 1B7KF2625S
after warming up for 10- 20 mins truck starts cutting out, backfiring, then dies out. After dying out, truck wont restart. cranks good, but no spark and no injector pulse. after letting it sit it starts up fine and runs good for a while, but eventually happens...
View
1997 Dodge Dakota 3.9L Poor Idle Quality, Stall, MIL Lamp on VIN: 1B443XCCT4
Hello everyone, if you read the vin it is not correct, this truck has no vin so I had to guess one. The problem this old Dakota has is I can reset all addaptives with scanner and it will run fine for 1 week and it will not idle one day then you reset all addap...
View
1997 Dodge Grand Caravan ES 3.8L Trans Code 43 VIN: 1B4GP54L1V
Daughter's 1997 3.8L Grand Caravan w/107,000 miles goes into limp-in mode with MIL ON and stores a code 43 (overdrive solenoid circuit error) every time you drive it; clear the code with a Snap-On scanner and all is well for about 1 to 2 miles and then it happ...
View
1999 Dodge Ram 3500 5.9L No Start, Barely idles VIN: 1B7MF3362X
Hello Fellow Techs, This Dodge 3500 with a 5.9 diesel was running fine with no signs of a problem. Then it just shut down like someone turned off the key. It would not start afterwards. After it set for about an hour it would start but will only idle and very... Trouble codes: P1688 (See Service Manuel), P0252 (Injector Pump A rotor/cam range/ perf)
View
2000 Dodge Ram 3500 5.9L No Start VIN: 1B7MF3369Y
truck was towed in , cut out while driving ,checked lift pump press 15 lbs,and flowed lots of fuel, checked fuses all ok ,...cracked #1 and #3 and#4 injector lines, cranked engine #1 began to flow almost a steady flow of fuel ,#3,#4 injectors only pulsed a ver...
View

Fixes & Summaries for Chrysler
Fix/Summary Answers
1993 Chrysler Concorde 3.5L Poor Idle Quality, Surge, Cuts out, Stall, Misfire
thanks guys the crank pulley was off 1 tooth.i set it straight and it runs like a top!
22
1994 Jeep Grand Cherokee Limited 5.2L 4 wheel drive switch VIN: 1J4G278Y5R
Sorry for the late post but the customer has not returned.I personally am suspecting the VIC module sisnce it is also giving us problems resettting the service intervals.The customer does not want to sink a lot of money into this old Jeep.If I ever get another...
7
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next