
![]() |
Professional Automotive Repair Technical Discussions for December 14, 2004 International Automotive Technicians' Network (iATN) - Members Only |
Next ![]() |
(Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. |
Open Help Requests for Chrysler
Help Request | Answers | |
1987 Dodge B250 5.2L No Start, Poor Idle Quality VIN: 2B6HB23T9H Hello Group, This van came in as a no start. Upon first inspection, I found the timing set wasted. I proceeded to replace them and expected all to be well. The vehicle immediately started and ran just fine for about 3 minutes. It then began to miss, chug and ... |
View | |
1995 Dodge Stratus 2.0L Stall VIN: 1B3EJ46X7S This vehicle came in with a complaint of a start and stall or stall condition when stopping. Suspected carbon buildup in the throttle blade area. Checked and found buildup in the throttle blades, cleaned carbon deposits and reset all adaptives. Test drove and ... |
View | |
1998 Dodge Durango 5.2L Poor Idle Quality, Stall VIN: 1B4HS28YXW I really need wsome help here, this truck is eating my lunch! Truck was towed in for a no start, customer had attempted to do tune-up & was all apart. I finished complete tune up & truck would not start. dropped exhaust & it started, but would not stay running... |
View | |
1999 Dodge Durango SLT 5.2L steering column VIN: 1B4HS28Y1X I test drove vehicle and verified customer complaint of a knocking noise in the steering column on take off and on hard braking. Noise cannot be heard if car is sitting still. No problems found in front end, and all steering linkages good. |
View | |
2001 Dodge Durango 5.9L compression #5 VIN: 1B4H528271 I would like to know if anyone has seen a problem with sudden mechanical problems in these engines. Customer was driving normally, vehicle had been maintained, etc, tune ups and oil changes, no apparent cause for sudden compression loss in cyl 5. Will be teari... |
View | |
1992 Eagle Talon 2.0L No Start, Cuts out, Stall, MIL Lamp on VIN: 4E3CS445R8 Dear Fellow Techs, This vehicle came in originally needing a tune-up. Did a tune-up; ran fine; customer happy. Came back in with CHECK ENGINE LIGHT ON but no codes and a relay kicking in and out. Started checking relay for fuel pump and wiring from relay to co... |
View | |
2000 Jeep Grand Cherokee Limited 4.0L ignition lock VIN: 1J4HGW58S9 The ignition key won't turn.I need to release the retaining button to get the tumbler out,but the key won't turn to the on position. I think there may be some trick to releasing it but I havn't had one like this. Thanks for your help. |
View |
Fixes & Summaries for Chrysler
Fix/Summary | Answers | |
2001 Chrysler PT Cruiser Limited 2.4L MIL Lamp on, no start VIN: 3C8FY4BBO1 This request has pretty well been sumed up in my previous post. The PCM and SKIM module are waiting to be reflashed along with matching keys. Time, distance and the absence of a Chrysler dealer on island have put us at a disadvantage. Everyone seemed to have p... |
13 | |
2002 Dodge Stratus SE 2.4L No Start VIN: 1B3DJ46Y61 well, firstly thanks to Edward from Virginia; Roger from Alberta; Cam from British columbia; Duane from Alaska and Alex from Washignton, after i have been checking this car for a while i found this: 1.- I can not found which one module was bad as you had told ... |
5 | |
1989 Plymouth Acclaim 2.5L Stall VIN: 1P3BA46K2K First of all I want to thank all of you who took the time to respond to my dilemma. I want to send special thanks to Michael from Illinois, Cam from Columbia, Dan from Illinois, Danny from Alabama, Kyle from Ohio, Jeff from Wisconsin, Adam from Illinois, Mark ... |
35 |