× Auto Repair Pros Member Benefits TechHelp Knowledge Base Forums Resources My iATN Marketplace Chat Pricing About Us Join Industry Sponsors Video Members Only Repair Shops Auto Pro Careers Auto Pro Reviews
Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for November 27, 2004
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Ford
Help Request Answers
1992 Ford F-150 Custom 5.0L No Start VIN: 1FTDF15N2N
i need some help please i have a ford truck with a no start the fuel pump runs all time and the coil will spark with just key on unplug spout and coil stops no data from computer once coil stops it will spark every once in a minute or so and when it sparks the...
1993 Ford F-150 XL 4.9L spark plugs VIN: 1FTEF14Y2P
Seeked help from Ford garage and they have no idea what the problem is.We,re going to try disconnecting the cataylic convertors next and running it to see if it will clear it up. Its not getting gas in the oil. Motor holds good oil pressure.When this first occ...
1994 Ford Tempo GL 2.3L Hesitation, MIL Lamp on VIN: 2FAPP36X7R
Hello everyone and thanx in advance for any help. Car came in, cust states check engine light comes on during long rides.We got the light to come on and the code stored was 186.We replaced the MAF sensor.O2 appears good,Fuel press. within specs,no vacuum leaks... Trouble codes: 186 (injector pulse high or maf to low)
1996 Ford Taurus GL 3.0L MIL Lamp on VIN: 1FALP52U5T
Hi everyone hope someone can help me out on this taurus. MIL light comes on intermitantly with a code P0443 evap control valve. This Taurus has a VMV (vacuum managment valve). I ohm tested valve and it was ok at 34.4 ohms, wires also ohmed ok from ecm to conne... Trouble codes: P0443

Fixes & Summaries for Ford
Fix/Summary Answers
1988 Ford F-350 Custom 7.3L Electric belt driven hydro pump VIN: FDKF38M6JN
Well fellow members the story goes something like this. After being told several times to check the belt tension & me just knowing it was the pump bearing cause that belt was tight. And then I thought 'Hey, I never did spray that belt to see if the noise cha...
1995 Ford E-150 Econoline 5.8L Curtesy Lights VIN: 1FDEE14H2S
The lights on the van have worked as designed more often than not. I have checked all but one reply and that was the switches on the door handle. It apears the van would have illuminated entry to have the switches on the handle I checked the hinges, replaced...
1999 Ford F-150 4.6L Unknown VIN: B676791149
hi tech : thanks to the many replies ,i had to change the master cylinder and every thing is find. the rubbers in the cylinder were swollen and pressure was by passing .I want to say thanks again
1999 Ford F-350 Super Duty Lariat 7.3L No Start VIN: 1FTSW31F2X
Thanks to eveyone that replied and offered help. The pcm was at fault-replaced and all is well Thanks again, Donny
2000 Ford F-250 Super Duty Lariat 7.3L No Start VIN: 1FTNW21F1Y
Thank you all for the very useful replies, I did replace both valve cover gaskets, that seemed to cure the problem. Although they are very expinsive 200.00 a crack. Thank all again for the help. HH
2001 Ford E-450 Econoline Super Duty Custom 7.3L ABS module VIN: 1FDXE45F61
response from Jim of Alberta I thinks says alot: No system is perfect... don't forget we have computer dweebs involved in our daily business. Reading through 'Principals of operation' in the 2001 WSM didn't help but I surmise that having both front speed sen...
1999 Mercury Sable LS 3.0L Cuts out, Misfire VIN: 1MEFM58S1X
of the 4 replies i recieved the only one that appeared close was the torque convertor shudder.we had already check the other replies.the customer didn't want to go any further.thanks for all the help.
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next