|Prev||Professional Automotive Repair Technical Discussions for November 7, 2004
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|1995 Ford E-150 Econoline 5.8L Curtesy Lights VIN: 1FDEE14H2S
This is my personel van. It is MarkIII conversion. The problem is the curtisy lights will only go out sometimes. I have replaced the door jamb switches in the front doors, the side cargo doors, and rear cargo doors. In the dark with the light is stuck on if yo...
|1999 Ford Windstar LX 3.8L MIL Lamp on VIN: 2FMZA5141X
looked for obvious problems and none found... i am at a loss here as to what is next to look for... heard that possible plastic intake problems... thanks in advance for any help Trouble codes: P0171, P0174
Fixes & Summaries for Ford
|1996 Ford Contour GL 2.0L Front wheel bearing VIN: 1FALP6533T
Thanks for all the help guys! Twenty replies in three days--pretty good. The replies were split three ways: ground problem, axle nut torque and worn/bent hub. When we came to press the old bearing out of the hub, the bearing busted apart and the inner race rem...
|2000 Ford Windstar LX 3.8L Poor Idle Quality, Hesitation, Surge, Cuts out, Stall, MIL Lamp on VIN: 2FMZA5141Y
Well the MAF fixed this vehicle. We did not reflash the PCM. It is running fine now. Thanks for the replies, Tom. Trouble codes: 1100 (MAF voltage out of range), 1121 (TP not in sync with MAF).
|1992 Lincoln Mark VII LSC 5.0L brake/abs light on all the time VIN: 4LNCM92E8N
I wish to thank Paul and Frank as they really steered us in the right direction. We actually had two problems. First one the customer introduced after the original repair. The customer had changed the fluid level switch with another one supplied by someone els...