|Prev||Professional Automotive Repair Technical Discussions for September 26, 2004
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for European
|1988 BMW 735i 3.4L Shifting
This BMW has the 8 prong electrical connector. The transmission shifts normal when cold. However, after achieving normal opperating temperature,transmission begins kicking in and out of Over Drive. When I down shift to drive, car runs normal for a few second...
|2000 Volkswagen Beetle GL 2.0L instruments VIN: 1TR5TRE252
instrument cluster whent out no tach blue water light oil pressure light on etc I have order a new cluster (checked all data they talk about the coolant resivior sensor leaking) but now I need to program the cluster??? to make it work. has anyone used the ross...
Fixes & Summaries for European
|1999 Mercedes-Benz E320 3.2L Electronic VIN: WBAE443892
Evap temp sensor failure is very very common but it doesn't cause the EC light to come on. The most common cause for the EC light to come on is a pressure problem either real (I had one guy add another lb of refrigerant when the evap sensor shut down his compr...
|2000 Mercedes-Benz C220 CDI .0L R/H side lights VIN: WDB2021932
Hi Thanks for the help, it seems that the bulb failure unit is either under or below the fuse box - but customer has not returned !!!
|1995 Volkswagen Jetta GL 2.0L 2nd gear VIN: 3VWRC81H6S
sorry i thought i had closed this a couple weeks ago.. i had two replies.. one said internal problem. the other is as follows... Don't want to be the berror of bad news but it sounds like the thrust bearing/shim is probly worn out that allows the drum to slide...
|2000 Volvo V70 2.4L new part VIN: 1WTREQ64T4
15 out of 15 replies said that there is no other way than using the factoy reprograming to do this so off to the dealer it went. I would like to hear from any one who is using a ast or baum scanner to see if they would do this. thanks paul