
![]() |
Professional Automotive Repair Technical Discussions for September 19, 2004 International Automotive Technicians' Network (iATN) - Members Only |
Next ![]() |
(Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. |
Open Help Requests for GM
Help Request | Answers | |
1993 Chevrolet Cavalier RS 2.2L Master Cylinder VIN: 1G1JC5446P My lead tech is replacing the brake master cylinder on an early-design semi-mechanical ABS designed system. This is due to a fading/receding pedal. The brake system can not develop proper pressure levels. We confirmed the problem by testing physical pressure a... |
View | |
1999 Chevrolet Tahoe LS 6.5L a/c compressor VIN: 1GNEK13R7X THIS VEHICLE CAME IN WITH THE A/C NOT WORKING. I FOUND THAT THE SYSTEM WAS JUST ABOUT EMPTY. AT THIS TIME I PULLED A VACUUM ON THE SYSTEM AND IT HELD 30 INCH LBS FOR AT LEAST 10 TO 15 MIN. THEN I RECHARGED SYSTEM AND ADDED DYE. AT THIS TIME I RUN VEHICLE AND C... |
View | |
1998 Oldsmobile Aurora 4.0L Stall VIN: 1G3CR6ZCXW Vehicle was brought in for a rough idle. Found random ign wire arcing. Replaced wires and plugs. Prob solved. Cust returns with a stall at idle complaint. I could only duplicate this one time. Engine just shuts down. No rough idle. It will restart with no trou... |
View |
Fixes & Summaries for GM
Fix/Summary | Answers | |
1989 Chevrolet Corvette 5.7L Poor Idle Quality, Surge, Stall VIN: 171YY2187K have seen customer twice since post we are planing on injector replacement which is in line with systom running great cold [with add.fuel being added by cold start inj.once warm c.s.inj.fuel is cut off leaning out system causing lean missfire i wish to thank a... |
15 | |
2000 Chevrolet Cavalier Z24 2.4L Excessive Emissions, Poor Idle Quality, Hesitation, Surge, Cuts out, Stall VIN: 1G1JF12T8Y The sensor on this vehicle is part #9350899, the # for the PCM reflash is #[...]. This car has a turbo charger installed. The customer provided me with an identical sensor, and the voltage was the same as the first one. About 2.5v KOEO. This allows a differ... |
4 |