
![]() |
Professional Automotive Repair Technical Discussions for March 21, 2004 International Automotive Technicians' Network (iATN) - Members Only |
Next ![]() |
(Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. |
Open Help Requests for GM
Help Request | Answers | |
1995 GMC Yukon SLE 5.7L bottom end bearing failure VIN: 3GKEK18K7S Driving on the interstate for 15 minutes with low oil pressure led to catastrophic bottom end failure. No leaks evident. Oil on the dipstick. Started it the next day and showed okay oil pressure cold with barely discernable knock indicating oil pump is at lea... |
View | |
1990 Oldsmobile Cutlass Supreme 3.1L Poor Idle Quality, Misfire VIN: 1G3WH54DOL i specilaize in jeeps, chryslers, dodge, dodge trucks, plymouths, and after all the possible test that i've run, i can't seem to locate problem, please, any help would be greatly appreciated |
View | |
1990 Oldsmobile Cutlass Supreme SL 3.1L Misfire, miss load & idle hot VIN: 1G3WS54T1L This is my first 3.1, usually do electronic diagnosis, all that seems fine. Car runs fine cold, 'til coolant temp gets to about 150 degrees then has a miss most noticed under load, increasing to a buck in 4th gear under load. Raise the rpm past 2500 and cannot... |
View | |
1993 Oldsmobile 88 Royale LS 3.8L Main bearings VIN: 1G3HY53L9P I have not ran across this problem with 3800's but I have heard this is a common problem, GM had problems with the cranks and used various size bearings from the factory. So any info would be appreciated. |
View | |
2001 Pontiac Grand Prix GTP 3.8L heads up display VIN: 1G2WR12121 Hello all-- Have this car here that the heads up display jumps all over when speed of vehicle is around 25-28 mph, also customer has said that the entire display will dim on its own when headlights are on but not all the time.checked for codes and nothing. sou... |
View |
Fixes & Summaries for GM
Fix/Summary | Answers | |
2000 Oldsmobile Alero GL 2.4L Hazard Switch VIN: 1G3NL52T9Y Found out how to replace switch by removing cluster and center vent for access to screws. Also found out that there is a recall on this problem and i'll let the dealer fix it. Thanks for the responses and have a great week. Spencer. |
11 |