× Auto Repair Pros Member Benefits TechHelp Knowledge Base Forums Resources My iATN Marketplace Chat Pricing About Us Join Industry Sponsors Video Members Only Repair Shops Auto Pro Careers Auto Pro Reviews
Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for January 26, 2004
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Ford
Help Request Answers
1987 Ford F-350 Custom 7.5L No Start VIN: 1FDJF37L4H
Hey, I have no fuel at the carb. I replaced the inline pump. This truck has dual tanks. I don't know if the fuel cutoff relay controls the inline pump also or just the in tank fuel pumps. Also where is the relay located? The inline pump runs with the key on b...
View
1991 Ford F-250 Custom 7.3L Unknown VIN: 1FTHX26M1M
this truck refuses to start without some starting fluid i have replaced the glow plugs and the "timer" was replaced at another shop. i do not usually work on diesels and i have no idea where to check next. the glow plugs are getting voltage. this happens when ...
View
1994 Ford Explorer Eddie Bauer 4.0L Surge, PING VIN: 1FMDU34X7R
Hi Gang! I think i have more than one problem here, the last time we saw this truck it came in for poor quality shift after recent transmission overhaul, as a side note then the owner said the cruise control was surging 3-5 mph, very aggressively. After replac...
View
1995 Ford F-350 XL 7.3L No Start VIN: 1FTJW36F6S
Hello All, Greetings & Salutations. I have a 7.3 Powerstroke that needs to have oil added to upper resevoir after sitting. Sets code p1212 - icp fault. icp pid = zero when problem is occurring (no start). Add oil to upper resevoir and all becomes ok. What can... Trouble codes: P1212 (ICP Problem)
View
1996 Ford F-350 XL 7.3L glow plugs VIN: 1FTJW36F3T
Need some advice from experienced diesel techs. Had miss due to harness under valve covers burned. Customer requested also change glow plugs. Seven came out, one threaded out easily, but the center electrode part is stuck in the head. Soaked with penetrating o...
View
1998 Ford F-150 Lariat 4.6L Lighting VIN: 1FTZX18W5W
Customer complaint of malfuntion of lights.Cargo light will stay on,L/ brake lights inop.,headlight buzzer stays on w/out key in ignition,door ajar light on.This happens not all the time and in no certain order.Truck came in this morning and is working fine, s...
View
1994 Mercury Grand Marquis GS 4.6L blower VIN: 2MECM75U5R
When select th floor setting blower will not operate, works on all other settings.
View

Fixes & Summaries for Ford
Fix/Summary Answers
1987 Ford F-150 Custom 5.0L No Start VIN: 1FTEX15N5H
I'm not sure which one was the cure. While waiting for the owner to track down a used PCM i replaced the neg. bat. cable and added a couple ground cables to the frame and body. After installing the PCM it has started fine since. I'm keeping my fingers crossed ... Trouble codes: 14 (erratic ign.), 41 (Ox. sensor), 53 (tp), 34 (evp), 29 (vss).
22
1992 Ford Crown Victoria 4.6L Pass compement VIN: 2FACP72WXN
Hi all, Got it Got it dang it if we did not get it!!! First THANK YOU TO ALL WHO REPLIED!!! This one turned out to be the HEATER CORE DESINE!! I bit the big one and pulled a heater box out of a good 92 crown vic with good heat and the one out of this one! (2...
19
1996 Ford Explorer XL 4.0L Hesitation VIN: IFMDU32X6T
Many thanks for the help on the repair of this vehicle. After testing the timeing advance (CMT vs CKT signals), and finding all signals normal except when at full throttle from dead stop. Found that CKT singal and CMT signal both went to 0 volts briefly when a...
19
1997 Ford E-350 Econoline 5.4L MIL Lamp on VIN: 1FDKE37L7V
Hey everyone. I talked with some old coworkers from my ford days and was told to make a harness for the CHT sensor and move it to the opposite head. I did and sure enough the thing is cured. Apparently, the Ford Hotline says that the cylinder head has a hot sp... Trouble codes: P1299, P1285.
3
1998 Ford Mustang 3.8L No Start VIN: 1FAP4444WF
Thanks for all the requests on the Pats keys.That was the problem somehow the key he got from the dealer worked for a while.Had to take this one to dealer and pass on it but the new keys worked.Thanks again. Trouble codes: P1260.
5
1999 Ford F-150 Lariat 4.6L body VIN: 2FTRF17W1X
thanks to a iatn member I fould out the was an updated driveshaft and ext housing.replaced shaft, truck is now smooth as glass thanks to all
14
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next