|
2013 Chevrolet Equinox LT 2.4L MIL Lamp on, reduced power
Car came in shop as a no start. would start and run but had reduced power message on dash On the exhaust cam codes the solenoid was bad, ohm'd way off spec. was replaced and no problem there the ckp sensor was scoped when the fuel problem was present ...
FIX posted 4/27/2018
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle 8 Replies Received (View Replies)8 Replies Received (Hide Replies)
|
Message Closed w/FIX
|
8 Replies Received
8 Replies Received
Related Documents & Media | VIN | 2GNALBEK8D |
| Engine | 2.4 L / 4 cyl / FLEX |
| Trans | 6-speed Automatic (Electronic) |
| Delivery | Fuel Injection / direct injection |
| Emissions | OBD-II Compliant |
| Symptoms | MIL Lamp on, Reduced Power |
| Occurs | Koeo |
| Misc. | Flex Fuel |
Trouble Codes
| P0013 | Camshaft 2 Position Sensor Circuit Open (Bank 1 Sensor 2) |
| P0014 | Camshaft 2 Position Sensor Target Performance (Bank 1 Sensor 2) |
| P0036 | Heated Oxygen Sensor (Bank 1 Sensor 2) Heater Circuit Malfunction |
| P0191 | Fuel Rail Pressure Sensor Circuit Performance |
| P0335 | Crankshaft Position Sensor 1 Circuit Malfunction (No Signal) |
| P0366 | Camshaft Position Sensor (TDC) 'B' Circuit Intermittent Signal |
Message Closed w/FIX
Vehicle Data
2013 Chevrolet Equinox LT
| VIN | 2GNALBEK8D |
| Engine | 2.4 L / 4 cyl / FLEX |
| Trans | 6-speed Automatic (Electronic) |
| Delivery | Fuel Injection / direct injection |
| Emissions | OBD-II Compliant |
| Symptoms | MIL Lamp on, Reduced Power |
| Occurs | Koeo |
| Misc. | Flex Fuel |
Trouble Codes
| P0013 | Camshaft 2 Position Sensor Circuit Open (Bank 1 Sensor 2) |
| P0014 | Camshaft 2 Position Sensor Target Performance (Bank 1 Sensor 2) |
| P0036 | Heated Oxygen Sensor (Bank 1 Sensor 2) Heater Circuit Malfunction |
| P0191 | Fuel Rail Pressure Sensor Circuit Performance |
| P0335 | Crankshaft Position Sensor 1 Circuit Malfunction (No Signal) |
| P0366 | Camshaft Position Sensor (TDC) 'B' Circuit Intermittent Signal |
Video