|
2007 Chevrolet Uplander 3.9L No Start, Poor Idle Quality, Stall, Misfire, MIL Lamp on
Vehicle had no power what so ever and was barely drivable. Long cranks and eventually would start. Put it in drive and slam on accelerator and it wouldn't move any faster than the idle speed could move the car. SLOWLY accelerating would eventually get you some...
FIX posted 6/18/2012
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle 10 Replies Received (View Replies)10 Replies Received (Hide Replies)
|
Message Closed w/FIX
|
10 Replies Received
10 Replies Received
Related Documents & Media | VIN | 1GBDV13127 |
| Engine | 3.9 L / 6 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | Fuel Injection |
| Emissions | OBD-II Compliant |
| Symptoms | No Start, Poor Idle Quality, Stall, Misfire, MIL Lamp On |
| Occurs | Always |
Trouble Codes
| P0315 | Crankshaft Position Sensor Not Learned |
| P0326 | Knock Sensor Noise Channel High Voltage |
| P0335 | Crankshaft Position Sensor 1 Circuit Malfunction (No Signal) |
| P0336 | CKP Sensor 1 Circuit Intermittent Signal |
Message Closed w/FIX
Vehicle Data
2007 Chevrolet Uplander
| VIN | 1GBDV13127 |
| Engine | 3.9 L / 6 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | Fuel Injection |
| Emissions | OBD-II Compliant |
| Symptoms | No Start, Poor Idle Quality, Stall, Misfire, MIL Lamp On |
| Occurs | Always |
Trouble Codes
| P0315 | Crankshaft Position Sensor Not Learned |
| P0326 | Knock Sensor Noise Channel High Voltage |
| P0335 | Crankshaft Position Sensor 1 Circuit Malfunction (No Signal) |
| P0336 | CKP Sensor 1 Circuit Intermittent Signal |
Video