|
1992 Buick LeSabre Limited 3.8L No Start, Stall
This Buick Le Sabre will run fine at idle, when shut off, it will not restart and code 17 shows up. In the book it says to disconnect icm harness from module and jumper terminals c and h. With key on, to check voltage at terminal c. If 5 volts is not shown on ...
Summary posted 5/20/2009
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle 12 Replies Received (View Replies)12 Replies Received (Hide Replies)
|
Message Closed w/Summary
|
12 Replies Received
12 Replies Received
Related Documents & Media | VIN | 1G4HR53L4N |
| Engine | 3.8 L / 6 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | FI / PFI |
| Emissions | US FED |
| Symptoms | No Start, Stall |
| Occurs | Always, Hot, Idle |
Trouble Codes
| 17 | rpm signal problem |
Message Closed w/Summary
Vehicle Data
1992 Buick LeSabre Limited
| VIN | 1G4HR53L4N |
| Engine | 3.8 L / 6 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | FI / PFI |
| Emissions | US FED |
| Symptoms | No Start, Stall |
| Occurs | Always, Hot, Idle |
Trouble Codes
| 17 | rpm signal problem |
Video