
1996 Chevrolet S10 4.3L No Start, Poor Idle Quality, Hesitation, Surge, Cuts out, Stall, Misfire, Poor Fuel Economy, MIL Lamp on
Just fixed a wierd one. Above codes and no 5 volt refernce from VCM to TPS or MAP. At times it had 1-2 volts on 5 volt reference wire. This truck had a Dealer install a VCM and no fix- they said it spiked all the sensors and needed them all replaced. Sounded l...
FIX posted 8/30/2007
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)4 Replies Received(Hide Replies)4 Replies Received
|
Message Closed w/FIX
|
VIN | 1GC1S67X9T |
Engine | 4.3 L / 6 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | FI |
Emissions | OBD-II Compliant |
Symptoms | No Start, Poor Idle Quality, Hesitation, Surge, Cuts Out, Stall, Misfire, Poor Fuel Economy, MIL Lamp On |
Occurs | Intermittently |
Misc. | 2WD X-Cab |
Trouble Codes
P0122 | Throttle Position Sensor Circuit Low Voltage |
P1122 | TP Sensor Signal Higher Than Expected |
P1406 | EGR Valve Pintle Position Circuit Malfunction |
Message Closed w/FIX
Vehicle Data
1996 Chevrolet S10
VIN | 1GC1S67X9T |
Engine | 4.3 L / 6 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | FI |
Emissions | OBD-II Compliant |
Symptoms | No Start, Poor Idle Quality, Hesitation, Surge, Cuts Out, Stall, Misfire, Poor Fuel Economy, MIL Lamp On |
Occurs | Intermittently |
Misc. | 2WD X-Cab |
Trouble Codes
P0122 | Throttle Position Sensor Circuit Low Voltage |
P1122 | TP Sensor Signal Higher Than Expected |
P1406 | EGR Valve Pintle Position Circuit Malfunction |