
2008 Ford F-250 Super Duty XLT 6.4L No Start, Stall, MIL Lamp on
dying during regeneration. backpressure before cat at 2000 rpm with DPF [...] (measured with gauge). DPF pressure (measured with scanner) [...] idle-.23psi 2000 rpm-1.2psi DPF "only part loaded when measurements taken". stft: #1)8 #2)12 #3)0 #4)-3 #5)-1 #6...
FIX posted 4/24/2020
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)4 Replies Received(Hide Replies)4 Replies Received
|
Message Closed
|
VIN | 1FTSX20R78 |
Engine | 6.4 L / 8 cyl / DIESEL |
Trans | 5-speed Automatic (Electronic) |
Delivery | Fuel Injection / diesel |
Emissions | OBD-II Compliant |
Symptoms | No Start, Stall, MIL Lamp On |
Occurs | Hot, Under Load, Cruise |
Trouble Codes
P0266 | Fuel Injector 2 Contribution / Balance |
P0297 | Vehicle Overspeed Condition |
P0302 | Cylinder 2 Misfire Detected |
P0703 | Brake Switch Sense Circuit Malfunction |
P200E | Catalyst System Over-Temperature (Bank 1) |
P246C | DPF restriction-forced limited power |
Message Closed
Vehicle Data
2008 Ford F-250 Super Duty XLT
VIN | 1FTSX20R78 |
Engine | 6.4 L / 8 cyl / DIESEL |
Trans | 5-speed Automatic (Electronic) |
Delivery | Fuel Injection / diesel |
Emissions | OBD-II Compliant |
Symptoms | No Start, Stall, MIL Lamp On |
Occurs | Hot, Under Load, Cruise |
Trouble Codes
P0266 | Fuel Injector 2 Contribution / Balance |
P0297 | Vehicle Overspeed Condition |
P0302 | Cylinder 2 Misfire Detected |
P0703 | Brake Switch Sense Circuit Malfunction |
P200E | Catalyst System Over-Temperature (Bank 1) |
P246C | DPF restriction-forced limited power |