
2005 Ford F-250 Super Duty Lariat 6.0L Poor Idle Quality
Truck will stall if rpms drop below 1500rpm. Input voltage from pcm to cam position sensor is 3v. I pulled the waveform off of the cam position sensor and found what appeared to be a good sine waveform. Icp was around 1000psi. Ficm sync was showing yes. cam fa...
FIX posted 1/19/2017
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)14 Replies Received(Hide Replies)14 Replies Received
|
Message Closed
|
VIN | 1FTSX21P55 |
Engine | 6.0 L / 8 cyl / DIESEL |
Trans | 5-speed Automatic (Electronic) |
Delivery | Fuel Injection |
Emissions | OBD-II Compliant |
Symptoms | Poor Idle Quality |
Occurs | Always, Idle |
Misc. | No Plow |
Trouble Codes
P2614 | Catalytic Converter Sulfur Content Too High |
Message Closed
Vehicle Data
2005 Ford F-250 Super Duty Lariat
VIN | 1FTSX21P55 |
Engine | 6.0 L / 8 cyl / DIESEL |
Trans | 5-speed Automatic (Electronic) |
Delivery | Fuel Injection |
Emissions | OBD-II Compliant |
Symptoms | Poor Idle Quality |
Occurs | Always, Idle |
Misc. | No Plow |
Trouble Codes
P2614 | Catalytic Converter Sulfur Content Too High |