
2006 Ford Taurus SE 3.0L No Start
I had this car come in 2 months ago. It was towed in because it died going down the road. Pulled codes, had ecu failure code. Replaced PCM and programmed. Started and ran fine. Here it is towed back in 2 months later and has the same 2 codes. If I run a koeo t...
FIX posted 11/19/2014
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)15 Replies Received(Hide Replies)15 Replies Received
|
Message Closed
|
VIN | 1FAFP53U76 |
Engine | 3.0 L / 6 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | Fuel Injection / port |
Emissions | OBD-II Compliant |
Symptoms | No Start |
Occurs | Always |
Trouble Codes
B1342 | ECU Damaged (EEPROM Inside PCM Not Working) |
B1601 | PATS Received Incorrect Key Code From Ignition Key Transponder |
Message Closed
Vehicle Data
2006 Ford Taurus SE
VIN | 1FAFP53U76 |
Engine | 3.0 L / 6 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | Fuel Injection / port |
Emissions | OBD-II Compliant |
Symptoms | No Start |
Occurs | Always |
Trouble Codes
B1342 | ECU Damaged (EEPROM Inside PCM Not Working) |
B1601 | PATS Received Incorrect Key Code From Ignition Key Transponder |