|
2005 Ford Freestar SES 3.9L Poor Idle Quality, Stall, MIL Lamp on
Hello there have a van that will start sometimes and run rough then stall or will not start. it acts like the timing is retarded. I changed the crank senosr and the cam senosr thinking that a false reading to pcm to no avil did not make a difference. Also have...
FIX posted 10/5/2011
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle 4 Replies Received (View Replies)4 Replies Received (Hide Replies)
|
Message Closed w/FIX
|
4 Replies Received
4 Replies Received
Related Documents & Media | VIN | 2FMZA57625 |
| Engine | 3.9 L / 6 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | Fuel Injection / sefi |
| Emissions | OBD-II Compliant |
| Symptoms | Poor Idle Quality, Stall, MIL Lamp On |
| Occurs | Always |
Trouble Codes
| P0174 | Fuel System Too Lean (Bank 2) |
| P0352 | Ignition Control Module Circuit 2 Malfunction |
| P2197 | Air Fuel Sensor (Bank 2 Sensor 1) Signal Stuck Lean |
Message Closed w/FIX
Vehicle Data
2005 Ford Freestar SES
| VIN | 2FMZA57625 |
| Engine | 3.9 L / 6 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | Fuel Injection / sefi |
| Emissions | OBD-II Compliant |
| Symptoms | Poor Idle Quality, Stall, MIL Lamp On |
| Occurs | Always |
Trouble Codes
| P0174 | Fuel System Too Lean (Bank 2) |
| P0352 | Ignition Control Module Circuit 2 Malfunction |
| P2197 | Air Fuel Sensor (Bank 2 Sensor 1) Signal Stuck Lean |
Video