|
1992 Ford Taurus GL 3.0L No Start
ok,here goes, i have no pewr to the pink/black wire to fuel pump,engine will start and run if i supply power at the inertia switch,wich i did to get into shop. koec i dont get power at the pink/black wire at ccr module either. next checked power at lb/o wire a...
FIX posted 1/12/2011
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle 21 Replies Received (View Replies)21 Replies Received (Hide Replies)
|
Message Closed w/FIX
|
| VIN | 1FACP50U2N |
| Engine | 3.0 L / 6 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | Fuel Injection / SEFI |
| Emissions | OBD1 |
| Symptoms | No Start |
| Occurs | Intermittently |
Trouble Codes
| 114 | Intake air temp circuit out of range |
| 116 | Ect or eot sensor out of range |
| 512 | Kam test failure |
| 542 | Fuel pump circuit open eca to ground |
| 543 | Fuel pump circuit open batt. To eca |
| 636 | Trans oil temp sensor |
Message Closed w/FIX
Vehicle Data
1992 Ford Taurus GL
| VIN | 1FACP50U2N |
| Engine | 3.0 L / 6 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | Fuel Injection / SEFI |
| Emissions | OBD1 |
| Symptoms | No Start |
| Occurs | Intermittently |
Trouble Codes
| 114 | Intake air temp circuit out of range |
| 116 | Ect or eot sensor out of range |
| 512 | Kam test failure |
| 542 | Fuel pump circuit open eca to ground |
| 543 | Fuel pump circuit open batt. To eca |
| 636 | Trans oil temp sensor |
21 Replies Received
21 Replies Received
Related Documents & Media