|
2001 Ford F-250 Super Duty XLT 7.3L No Start, Cuts out, Stall
Truck came in with a problem of no power when hot. I test drove and found as soon as it heats up it looses all power and shuts off. Cranks over fine just acts like no fuel. After setting for 10 to 15 min. it will restart and runs very rough and then slowly pic...
FIX posted 10/14/2010
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle 9 Replies Received (View Replies)9 Replies Received (Hide Replies)
|
Message Closed w/FIX
|
9 Replies Received
9 Replies Received
Related Documents & Media | VIN | 1FTNX21F31 |
| Engine | 7.3 L / 8 cyl / DIESEL |
| Trans | 5-speed Standard |
| Delivery | Fuel Injection |
| Emissions | OBD-II Compliant |
| Symptoms | No Start, Cuts Out, Stall |
| Occurs | Always, Hot |
Trouble Codes
| P0340 | Camshaft Position Sensor 'A' (TDC) Circuit Intermittent |
| P0541 | Low Voltage At Intake Air Heater Relay 1 |
| P1670 | Output Driver 4 Voltage High Input |
Message Closed w/FIX
Vehicle Data
2001 Ford F-250 Super Duty XLT
| VIN | 1FTNX21F31 |
| Engine | 7.3 L / 8 cyl / DIESEL |
| Trans | 5-speed Standard |
| Delivery | Fuel Injection |
| Emissions | OBD-II Compliant |
| Symptoms | No Start, Cuts Out, Stall |
| Occurs | Always, Hot |
Trouble Codes
| P0340 | Camshaft Position Sensor 'A' (TDC) Circuit Intermittent |
| P0541 | Low Voltage At Intake Air Heater Relay 1 |
| P1670 | Output Driver 4 Voltage High Input |
Video