|
2004 Ford F-250 Super Duty XL 6.0L No Start
I have this 6.0L causing some problems. It will not start at all. The fuel filters have been replaced. Fuel pressure is 60-65. ICP pressure is only 550psi MAX! I know this is low but spec is min of 500. It seems as if it almost wants to start after cranking fo...
FIX posted 8/11/2010
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle 19 Replies Received (View Replies)19 Replies Received (Hide Replies)
|
Message Closed
|
19 Replies Received
19 Replies Received
Related Documents & Media | VIN | 1FTNX21PO4 |
| Engine | 6.0 L / 8 cyl / DIESEL |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | Fuel Injection |
| Emissions | OBD-II Compliant |
| Symptoms | No Start |
| Occurs | Not Applicable, Always |
Trouble Codes
| P0299 | Turbocharger Underboost Problem |
| P0470 | Exhaust Backpressure Sensor Circuit Malfunction |
| P2290 | Injector Control Pressure Too Low |
| P2614 | Catalytic Converter Sulfur Content Too High |
| P2617 | Crankshaft Position Signal Output Circuit Malfunction |
Message Closed
Vehicle Data
2004 Ford F-250 Super Duty XL
| VIN | 1FTNX21PO4 |
| Engine | 6.0 L / 8 cyl / DIESEL |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | Fuel Injection |
| Emissions | OBD-II Compliant |
| Symptoms | No Start |
| Occurs | Not Applicable, Always |
Trouble Codes
| P0299 | Turbocharger Underboost Problem |
| P0470 | Exhaust Backpressure Sensor Circuit Malfunction |
| P2290 | Injector Control Pressure Too Low |
| P2614 | Catalytic Converter Sulfur Content Too High |
| P2617 | Crankshaft Position Signal Output Circuit Malfunction |
Video