
2000 Ford Contour SE 2.0L Excessive Emissions, Poor Idle Quality, Hesitation, Surge, Cuts out, Stall, Misfire, MIL Lamp on
I am at my wits end here, the only thing i have not checked is the ground, that i cant find in the trunk area that ground the driver for the fuel pump, does any body know were this is, i dont think its a ground problem any way because i suuplied my own ground ...
FIX posted 10/25/2008
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)6 Replies Received(Hide Replies)6 Replies Received
|
Message Closed w/FIX
|
VIN | 1FAFP66Z3Y |
Engine | 2.0 L / 4 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | FI / fuel injected no return line |
Emissions | OBD-II Compliant |
Symptoms | Excessive Emissions, Poor Idle Quality, Hesitation, Surge, Cuts Out, Stall, Misfire, MIL Lamp On |
Occurs | Always |
Trouble Codes
P0190 | Fuel Pressure Sensor Circuit Signal Voltage Too High |
P0303 | Cylinder 3 Misfire Detected |
U1262 | Data Circuit Malfunction |
Message Closed w/FIX
Vehicle Data
2000 Ford Contour SE
VIN | 1FAFP66Z3Y |
Engine | 2.0 L / 4 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | FI / fuel injected no return line |
Emissions | OBD-II Compliant |
Symptoms | Excessive Emissions, Poor Idle Quality, Hesitation, Surge, Cuts Out, Stall, Misfire, MIL Lamp On |
Occurs | Always |
Trouble Codes
P0190 | Fuel Pressure Sensor Circuit Signal Voltage Too High |
P0303 | Cylinder 3 Misfire Detected |
U1262 | Data Circuit Malfunction |