|
1995 Ford Mustang 3.8L No Start, Poor Idle Quality, Surge, Cuts out, Stall, Misfire, MIL Lamp on
Car came in with the (below) codes and a dead coil. Customer also had an auto wreaker coil which was also no good on the 2-6 cyls. And a ignition module also from the wreakers. The fuse # 18 which powers the coil and the PCM relay was also blown. I checked all...
FIX posted 11/15/2007
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle 6 Replies Received (View Replies)6 Replies Received (Hide Replies)
|
Message Closed w/FIX
|
6 Replies Received
6 Replies Received
Related Documents & Media | VIN | 1FALP4041S |
| Engine | 3.8 L / 6 cyl / GAS |
| Trans | 5-speed Standard |
| Delivery | FI / sefi |
| Emissions | Not OBD-II Compliant |
| Symptoms | No Start, Poor Idle Quality, Surge, Cuts Out, Stall, Misfire, MIL Lamp On |
| Occurs | Always |
Trouble Codes
| P0302 | Cylinder 2 Misfire Detected |
| P0306 | Cylinder 6 Misfire Detected |
| P1354 | Ignition Coil 4 Control Circuit High Voltage |
Message Closed w/FIX
Vehicle Data
1995 Ford Mustang
| VIN | 1FALP4041S |
| Engine | 3.8 L / 6 cyl / GAS |
| Trans | 5-speed Standard |
| Delivery | FI / sefi |
| Emissions | Not OBD-II Compliant |
| Symptoms | No Start, Poor Idle Quality, Surge, Cuts Out, Stall, Misfire, MIL Lamp On |
| Occurs | Always |
Trouble Codes
| P0302 | Cylinder 2 Misfire Detected |
| P0306 | Cylinder 6 Misfire Detected |
| P1354 | Ignition Coil 4 Control Circuit High Voltage |
Video