|
2004 Ford E-450 Super Duty 6.0L Cuts out, Stall
Hello, This one is a school bus/omni. This vehicle will only stall out in reverse under load and vehicle must be hot at least half way on guage. When it stalls out it seems like it is ign. stall. Shuts right down and we get a crankshaft sensor open fault. We h...
FIX posted 9/13/2007
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle 9 Replies Received (View Replies)9 Replies Received (Hide Replies)
|
Message Closed w/FIX
|
9 Replies Received
9 Replies Received
Related Documents & Media | VIN | 1FDXE45P44 |
| Engine | 6.0 L / 8 cyl / DIESEL |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | FI / DIESEL |
| Emissions | OBD-II Compliant |
| Symptoms | Cuts Out, Stall |
| Occurs | Hot, on Accel |
Trouble Codes
| P0336 | CKP Sensor 1 Circuit Intermittent Signal |
| P0341 | Camshaft Position Sensor (TDC) 'A' Circuit No Signal |
| P2261 | Turbocharger Bypass Control Valve Stuck Closed |
| P2614 | Catalytic Converter Sulfur Content Too High |
Message Closed w/FIX
Vehicle Data
2004 Ford E-450 Super Duty
| VIN | 1FDXE45P44 |
| Engine | 6.0 L / 8 cyl / DIESEL |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | FI / DIESEL |
| Emissions | OBD-II Compliant |
| Symptoms | Cuts Out, Stall |
| Occurs | Hot, on Accel |
Trouble Codes
| P0336 | CKP Sensor 1 Circuit Intermittent Signal |
| P0341 | Camshaft Position Sensor (TDC) 'A' Circuit No Signal |
| P2261 | Turbocharger Bypass Control Valve Stuck Closed |
| P2614 | Catalytic Converter Sulfur Content Too High |
Video