
1996 Ford Bronco Eddie Bauer 5.8L MIL Lamp on
This truck came in with these three codes. We replaced one of the o2 sensors with a known good one and cleared the codes but all three come right back after two start-ups. If you look at scan data when you first start it, you will see the PCM commanding all th...
FIX posted 9/21/2006
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)5 Replies Received(Hide Replies)5 Replies Received
|
Message Closed w/FIX
|
VIN | 1FMEU15HXT |
Engine | 5.8 L / 8 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | FI / SEFI |
Emissions | OBD-II Compliant |
Symptoms | MIL Lamp On |
Occurs | Start Up |
Trouble Codes
P0135 | Heated Oxygen Sensor (Bank 1 Sensor 1) Heater Circuit Malfunction |
P0141 | Heated Oxygen Sensor (Bank 1 Sensor 2) Heater Circuit Malfunction |
P0155 | Heated Oxygen Sensor (Bank 2 Sensor 1) Heater Circuit Malfunction |
Message Closed w/FIX
Vehicle Data
1996 Ford Bronco Eddie Bauer
VIN | 1FMEU15HXT |
Engine | 5.8 L / 8 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | FI / SEFI |
Emissions | OBD-II Compliant |
Symptoms | MIL Lamp On |
Occurs | Start Up |
Trouble Codes
P0135 | Heated Oxygen Sensor (Bank 1 Sensor 1) Heater Circuit Malfunction |
P0141 | Heated Oxygen Sensor (Bank 1 Sensor 2) Heater Circuit Malfunction |
P0155 | Heated Oxygen Sensor (Bank 2 Sensor 1) Heater Circuit Malfunction |