
2016 Land Rover Range Rover HSE 3.0L MIL Lamp on
This Rover came in with several trouble codes, but the only one set as permanent was [...]. So we went through the DEF system. We found the tank very low and the injector would drip fluid when performing the DEF pressure test. So to start with we replaced ...
Summary posted 7/11/2025
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)4 Replies Received(Hide Replies)4 Replies Received
|
Message Closed w/Summary
|
VIN | SALGS2KF7G |
Engine | 3.0 L / 6 cyl / DIESEL |
Trans | 8-speed Automatic (Electronic) |
Delivery | Fuel Injection |
Emissions | OBD-II Compliant |
Symptoms | MIL Lamp On |
Occurs | Always |
Trouble Codes
P1340 | ION Sensing Module Cylinder ID Malfunction |
P22FB | Nox sensor performance - sensing element bank1 sensor1 |
P249D | Closed loop diesel exhaust fluid injection control at limit- flow too low |
P2BAE | Nox exceedance- Nox control monitoring system |
P50E0 | cold start engine exhaust temp too low |
Message Closed w/Summary
Vehicle Data
2016 Land Rover Range Rover HSE
VIN | SALGS2KF7G |
Engine | 3.0 L / 6 cyl / DIESEL |
Trans | 8-speed Automatic (Electronic) |
Delivery | Fuel Injection |
Emissions | OBD-II Compliant |
Symptoms | MIL Lamp On |
Occurs | Always |
Trouble Codes
P1340 | ION Sensing Module Cylinder ID Malfunction |
P22FB | Nox sensor performance - sensing element bank1 sensor1 |
P249D | Closed loop diesel exhaust fluid injection control at limit- flow too low |
P2BAE | Nox exceedance- Nox control monitoring system |
P50E0 | cold start engine exhaust temp too low |