
2013 Land Rover Range Rover Evoque Pure 2.0L Excessive Emissions, Poor Idle Quality, Misfire, MIL Lamp on
Customer just purchased this (otherwise nice) 2013 Evoque with no warranty. It will start and idle poorly and will not accelerate, as in ZERO throttle response. Foot to floor, it doesn't even respond. Fuel pressure fluctuates between 8 and 11 MPa. Any insi...
Summary posted 2/2/2024
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)9 Replies Received(Hide Replies)9 Replies Received
|
Message Closed w/Summary
|
VIN | SALVP28G4D |
Engine | 2.0 L / 4 cyl / GAS |
Trans | 6-speed Automatic (Electronic) |
Delivery | Fuel Injection |
Emissions | OBD-II Compliant |
Symptoms | Excessive Emissions, Poor Idle Quality, Misfire, MIL Lamp On |
Occurs | Always, Cold, Hot, on Accel |
Trouble Codes
1 | |
2 | |
3 | |
4 | multiple misfires |
P0300 | Multiple Misfire Detected |
P0366 | Camshaft Position Sensor (TDC) 'B' Circuit Intermittent Signal |
P0505 | Idle Speed Control System |
P0506 | Idle Speed Control System Lower Than Expected |
P0560 | PCM Backup Circuit Low Voltage |
P2544 | Throttle Valve Actuator General Error |
Message Closed w/Summary
Vehicle Data
2013 Land Rover Range Rover Evoque Pure
VIN | SALVP28G4D |
Engine | 2.0 L / 4 cyl / GAS |
Trans | 6-speed Automatic (Electronic) |
Delivery | Fuel Injection |
Emissions | OBD-II Compliant |
Symptoms | Excessive Emissions, Poor Idle Quality, Misfire, MIL Lamp On |
Occurs | Always, Cold, Hot, on Accel |
Trouble Codes
1 | |
2 | |
3 | |
4 | multiple misfires |
P0300 | Multiple Misfire Detected |
P0366 | Camshaft Position Sensor (TDC) 'B' Circuit Intermittent Signal |
P0505 | Idle Speed Control System |
P0506 | Idle Speed Control System Lower Than Expected |
P0560 | PCM Backup Circuit Low Voltage |
P2544 | Throttle Valve Actuator General Error |