
2008 Land Rover LR2 SE 3.2L MIL Lamp on
We did remove the int. man. to replace rad fan...After reassemble, we have these codes...We have looked to see if we left a connector off, but everything looks good. My info says the baro snsr is in the ECU...With engine running, map & baro snsr does not chang...
FIX posted 7/29/2017
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)5 Replies Received(Hide Replies)5 Replies Received
|
Message Closed w/FIX
|
VIN | SALFP24NX8 |
Engine | 3.2 L / 6 cyl / GAS |
Trans | 6-speed Automatic (Electronic) |
Delivery | Fuel Injection / map & baro sensor |
Emissions | OBD-II Compliant |
Symptoms | MIL Lamp On |
Occurs | Always |
Trouble Codes
P0069 | Manifold Pressure / Barometric Pressure Correlation |
P0108 | Manifold Air Pressure Sensor Circuit High Voltage |
Message Closed w/FIX
Vehicle Data
2008 Land Rover LR2 SE
VIN | SALFP24NX8 |
Engine | 3.2 L / 6 cyl / GAS |
Trans | 6-speed Automatic (Electronic) |
Delivery | Fuel Injection / map & baro sensor |
Emissions | OBD-II Compliant |
Symptoms | MIL Lamp On |
Occurs | Always |
Trouble Codes
P0069 | Manifold Pressure / Barometric Pressure Correlation |
P0108 | Manifold Air Pressure Sensor Circuit High Voltage |