|
2005 Volvo V70 2.4 2.4L No Start, Poor Idle Quality, Stall, MIL Lamp on
The car arrived and if you cranked it long enough, it would start and run with no throttle response and restricted performance displayed. I pulled the codes. All of the DTCs were revolving around low signal. I checked for the 5 volt reference at this time. I h...
Summary posted 4/26/2017
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle 11 Replies Received (View Replies)11 Replies Received (Hide Replies)
|
Message Closed w/Summary
|
11 Replies Received
11 Replies Received
Related Documents & Media | VIN | YV1SW61295 |
| Engine | 2.4 L / 5 cyl / GAS |
| Trans | 5-speed Automatic (Electronic) |
| Delivery | Fuel Injection |
| Emissions | OBD-II Compliant |
| Symptoms | No Start, Poor Idle Quality, Stall, MIL Lamp On |
| Occurs | Always |
Trouble Codes
| ECM10 | ECM faulty signal |
| ECM14 | MAP signal too low |
| ECM26 | Fuel pressure signal too low |
| ECM50 | A/C pressure signal too low |
| ECM84 | 5 Volt signal too low |
| ECM91 | Throttle valve signal too low |
Message Closed w/Summary
Vehicle Data
2005 Volvo V70 2.4
| VIN | YV1SW61295 |
| Engine | 2.4 L / 5 cyl / GAS |
| Trans | 5-speed Automatic (Electronic) |
| Delivery | Fuel Injection |
| Emissions | OBD-II Compliant |
| Symptoms | No Start, Poor Idle Quality, Stall, MIL Lamp On |
| Occurs | Always |
Trouble Codes
| ECM10 | ECM faulty signal |
| ECM14 | MAP signal too low |
| ECM26 | Fuel pressure signal too low |
| ECM50 | A/C pressure signal too low |
| ECM84 | 5 Volt signal too low |
| ECM91 | Throttle valve signal too low |
Video