
2005 Audi A6 Quattro 3.2L No Start, Poor Idle Quality, Cuts out, Stall, Misfire
Car came in as no start cranks ok it would start and stall with open throttle but would stall and the check engine light would flash and would show epc failure in cluster checked codes had p0341/p0366/p0346/p0391/all 4 are cmp sensor codes p0301/p0302/p0301 mi...
FIX posted 12/13/2016
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)4 Replies Received(Hide Replies)4 Replies Received
|
Message Closed w/FIX
|
VIN | WAUDG74F15 |
Engine | 3.2 L / 6 cyl / GAS |
Trans | 6-speed Automatic (Electronic) |
Delivery | Fuel Injection / direct injection |
Emissions | OBD-II Compliant |
Symptoms | No Start, Poor Idle Quality, Cuts Out, Stall, Misfire |
Occurs | Always |
Trouble Codes
P0302 | Cylinder 2 Misfire Detected |
P0303 | Cylinder 3 Misfire Detected |
P0341 | Camshaft Position Sensor (TDC) 'A' Circuit No Signal |
P0346 | Intake Camshaft Position Sensor Performance (Bank 2) |
P0366 | Camshaft Position Sensor (TDC) 'B' Circuit Intermittent Signal |
P0391 | Engine CAN Bus - The Coding For Component Transmission Control Unit |
Message Closed w/FIX
Vehicle Data
2005 Audi A6 Quattro
VIN | WAUDG74F15 |
Engine | 3.2 L / 6 cyl / GAS |
Trans | 6-speed Automatic (Electronic) |
Delivery | Fuel Injection / direct injection |
Emissions | OBD-II Compliant |
Symptoms | No Start, Poor Idle Quality, Cuts Out, Stall, Misfire |
Occurs | Always |
Trouble Codes
P0302 | Cylinder 2 Misfire Detected |
P0303 | Cylinder 3 Misfire Detected |
P0341 | Camshaft Position Sensor (TDC) 'A' Circuit No Signal |
P0346 | Intake Camshaft Position Sensor Performance (Bank 2) |
P0366 | Camshaft Position Sensor (TDC) 'B' Circuit Intermittent Signal |
P0391 | Engine CAN Bus - The Coding For Component Transmission Control Unit |